Teledyne Model T100
Teledyne API

Teledyne Model T100

Pine Item #

The Model T100 uses the proven UV fluorescence principle, coupled with a state of the art user interface to provide easy, accurate, and dependable measurements of low-level SO2.   Exceptional stability is achieved with the use of an optical shutter to compensate for PMT drift and a reference detector to correct for changes in UV lamp intensity. A hydrocarbon "˜kicker' and advanced optical design combine to prevent inaccuracies due to interferents.   All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/0, and built-in data acquisition capability. All instrument set up, control, and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports either locally or by remote connection using the
included APIcom™ software.

Features:

Ranges: 0-50 ppb to 0-20 ppm, user selectable

Selectable ranges, with dual range capability

Large, vivid, and durable color graphics display with touch screen interface

Ethernet, RS-232, and (optional) USB com ports

Front panel USB connections for peripheral devices and firmware upgrades

8 analog inputs (optional)

Adaptive signal filtering optimizes response time

Temperature & pressure compensation

Internal zero & span check (optional)

Comprehensive internal data logging with programmable averaging periods

Ability to log virtually any operating parameter

Applications:

Ambient Air Monitoring​

Roadside Air Monitoring

CEMS – Stack Air Monitoring

Quantity must be 1 or more
Email for Quote

Specifications
 RangesMin: 0 - 50 ppb full scale
Max: 0 - 20,000 ppb full scale (selectable, dual-range supported)
 Measurement Unitsppb, ppm, μg/m3, mg/m3 (selectable)
 Zero Noise< 0.2 ppb (RMS)
 Span Noise< 0.5% of reading (RMS) above 50 ppb
 Lower Detectable Limit< 0.4 ppb
 Zero Drift< 0.5 ppb/24 hours
 Span Drift< 0.5% of full scale/24 hours
 Response Time< 120 seconds to 95%
 Linearity1% of full scale
 Sample Flow Rate650 cc/min ±10%
 Power Requirements100V-120V, 220V-240V, 50/60 Hz
 Analog Output Ranges10V, 5V, 1V, 0.1V (selectable)
 Recorder Offset±10%
 Included I/O1 x Ethernet: 10/100Base-T
2 x RS232 (300-115,200 baud)
2 x USB device ports
8 x opto-isolated digital outputs
6 x opto-isolated digital inputs
4 x analog outputs
 Optional I/O1 x USB com port
1 x RS485
4 x digital alarm outputs
Multidrop RS232
3 x 4 - 20mA current outputs
 Operating Temperature Range5 - 40ºC (with US EPA Approval)
 Dimensions (HxWxD)7” x 17” x 23.5” (178 x 432 x 597 mm)
 Weight35.7 lbs (16.2 kg)