Teledyne Model 701 Zero Air System
Teledyne API

Teledyne Model 701 Zero Air System

Pine Item #54945

The Model 701 is an excellent source of clean, dry air for dilution calibrators. It also may be used as a source of purge air for permeation tube ovens or burner air for FID analyzers. The regenerative, heatless dryer removes water and produces gas with a dewpoint of less than -20°C (up to 15 SLPM flow rate) independent of the inlet dewpoint and assists in the removal of other gases, greatly increasing the life of the chemical scrubbers. The basic Model 701 includes an oil and diaphragm free pump plus scrubbers to remove SO2, NO, NO2, O3, NH3, and H2S. Optional high-performance scrubbers are available to remove CO and Hydrocarbons.   Inlet air is pulled into the pump and routed through a pre-cooler and water trap to remove moisture. The air then passes through the regenerative scrubber for final drying and then to the storage tank. The tank pressure is monitored and maintained at a preset level by cycling the pump automatically as needed, thereby extending both the pump and scrubber life. Outlet air then passes through a filter to assure a clean,
dry, analytical zero air supply. A microcontroller cycles the regenerative dryer and water trap valves preventing the pump from starting against full head pressure. The Model 701 is an ideal accessory to the Model T700 Series Dilution Calibrators or as a zero air source for analyzers.

Features:

Standard two-year warranty

Regenerative heatless dryer for maintenancefree water removal independent of inlet dewpoint

Long life scrubbers for SO2 NO NO2 O3 NH3 and H2S

Optional CO or CO and Hydrocarbon scrubber

Automatic water drain

Automatic pump control based on flow demand

May be used to provide combustion air for FID (with HC Scrubber option)

Source of purge air for permeation tube ovens

Zero air for Ozone Generators

Quantity must be 1 or more
Email for Quote

Specifications

Technical Specifications

Output:20 SLPM @ 30 psig
Dewpoint:-20°C up to 15 LPM
Dryer:Regenerative heatless dryer with lifetime of\ngreater than 5 years
Output concentrations\n(maximum):SO2 < 0.1 ppb\nH2S < 0.1 ppb\nNO < 0.1 ppb\nNO2 < 0.1 ppb\nO3 < 0.4 ppb\nNH3 < 0.1 ppb\nCO < 20 ppb (requires optional scrubber)\nHydrocarbons < 5
Pump:Internal long-life oil-less piston pump
Mounting:Bench type mounting rack mount optional
Dimensions (HxWxD):8.75” (22.2 cm) x 17” (43.2 cm) x 28” (71.12\ncm)
Weight:55 lbs (25 kg)
Power Requirements:115V 60 Hz\n220-240V 50/60 Hz
ApprovalsCE