PermaPure
Email for Quote
Permapure MINI GAS system
Pine Item #54397
The PermaPure Mini-GASS systems prepare hot gas sample streams for high performance gas analysis. This popular unit removes particles, acid mists, and water vapor from a gas stream without the loss of analytes. Mini-GASS unit offers several options and configurations, including mounting directly on the stack so very little heated line is used. An automatic drain installed on the filter will remove acid mists. They are designed to process highly corrosive and difficult samples including gas streams containing high levels of HCl, HF, NOx or SOx.
Features:
0.1 micron coalescing/particulate filter
Accepts flow rates up to 10 LPM
Conditions hot dirty very wet samples
Yields sample dew points as low as -25?C
Specifications
Manuals & Data Sheets
| Sample flow rate | 0 to 10 lpm |
| Sample inlet temperature | 250°F (121°C) max. with stainless steel filter 230°F (110°C) max. with Kynar filter |
| Sample inlet water vapor | 30% by volume maximum |
| Purge air requirements | Maximum 1 cfm of oil-free instrument air or nitrogen with less than -40°C dew point |
| Gas sample inlet and outlet fittings | ¼” or 3/8” tubing fittings |
| Electrical requirements | 115V ±10% or 230V ±10%, 50/60Hz, 8.0A/4.0A (up to 900 Watts depending on options) |