Olympus BondMaster 1000+ Ultrasonic Bond Tester
Olympus IMS

Olympus BondMaster 1000+ Ultrasonic Bond Tester

Pine Item #54129

The BondMaster 1000+ is a versatile, full multi-mode Ultrasonic Bond Tester with Resonance, MIA, Pitch/Catch mode and new RF display mode. This offers rental users the ability to select the method best suited to inspect the wide variety of composite materials used. Its high performance, lightweight, and rugged durability make it the NDT hire choice for applications in the manufacturing, maintenance and repair of composite structures.

Features:

Alarm outputs

Customer interchangeable displays: - Hi-Brite Electroluminescent - Monochrome Liquid Crystal - Color Liquid Crystal

Full Multi-Mode Capability: - Pitch / Catch (Swept Impulse RF) - Resonance - MIA - Mechanical Impedance Analysis

Lightweight less than 4lbs. (1.8 Kg)

PowerLinkTM Technology - automatic probe recognition and instrument set-up

Program storage

RS-232 output for printer or computer interface

Single Li-Ion battery

Trace storage

VGA Output

Quantity must be 1 or more
Email for Quote

Specifications

Technical Specifications

Battery Operating Time:6 to 8 hours
Power Requirements:85 to 240 volts 50 to 60 Hz mains. External holder charges batteries outside the instrument. Charging time is typically 4 hours.
LanguagesEnglish Spanish French or German
Analog Output Update:Rate continuous in MIA and resonance modes. Data available at repetition rate in all pitch/ catch modes
Operating Temperature-4 to 140 degrees F
Frequency Range250 Hz to 1.5 MHz
Gain-10 to 50.0 dB
Test MethodsThe modes of operation are Pitch / Catch (Swept Impulse RF) Resonance and MIA
Pitch/Catch Swept:Measures amplitude and phase changes using a swept frequency method to detect disbonds. Requires no couplant.
Pitch/Catch Impulse:Measures amplitude and phase changes using a short burst of energy to detect disbonds. Displays information in envelope or vector display fo
Pitch/Catch RF Impulse:Measures amplitude and phase changes using a short burst of energy to detect disbonds. Displays information in envelope or vector display fo
Resonance:Detects disbonds by changes in phase and amplitude of probe resonance. Requires couplant.
Mechanical Impedance Analysis (MIA):Measures the stiffness and mass of the material under test. The output is measured in both amplitude and phase. Requires no couplant.
Alarm LogicPositive or negative alarm gate
Alarm Output0 V to +3 V HC logic output switchable audible alarm and front panel annunciator alarm indicator on probe is standard.
Clock/CalendarTime and date are stored and printed with each waveform.
Screen storageUp to 20 screens can be stored.
Program storageUp to 100 instrument setups
Probe connector11-pin Fisher
Analog outputsSignals: +/- 5 volt adjustable offset not affected by position controls or ZOOM function.
RS-232 InterfaceScreen printout and computer interface. Baud rate is adjustable from 2400 to 19200 baud (9600 is default).
ClassificationBased on Class 2 specifications from the MIL-PRF-28800F Handbook
AltitudeMaximum operating and nonoperating altitude- 15000 ft. (4600 m)
Hazardous Area OperationSafe operation as defined by Class I Division 2 Group D as found in the National Fire Association Code (NFPA 70) Section 500 and tested
DimensionsUS: 9.5L x 5.5 x 3.6 in. Metric: 215 x 165 x 92mm
Manuals & Data Sheets

Related Products