
California Analytical 600 Series MHFID Total Hydrocarbon/Methane/Non-Methane Hydrocarbon Analyzer
The CAI Model 600 MHFID Analyzer is designed to continuously measure the total concentration of hydrocarbons or methane within a gaseous sample. The analyzers exhibit superior sensitivity and response time.
The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems. This instrument can measure THC or CH4 in the ppm or percent levels. All internal components are maintained at the oven set temperature preventing condensation.
Options for Internal Heated Sample Pump and Internal Zero/Span Solenoid Values are available.
Features:
Analog outputs - user scalable
Auto ranging / auto calibration
Automatic fuel/air shut-off
Communications: RS232 TCP/IP
Data archiving
Electric flow control
Fast response time
Flame ignition - local remote or automatic
Four user definable ranges from 0-3 ppm to 0-30000 ppm
Meausres CH4 THC and NMHC
Remote monitoring and control
Temperature stabilized detector
Detector | Flame ionization detection |
THC Ranges | Four user definable ranges from 0-3 ppm to 0-30000 ppm |
Response Time | 90% Full Scale in 1.5 seconds |
Resolution Detection Limit | 10 ppb |
Repeatability | Better than 0.5% of full scale |
Linearity | Better than 1% of full scale |
Noise | Less than 1% of full scale |
Special Features | Auto ranging auto calibration (adjustable through internal clock) data archiving |
Dimensions | US: 5.25 x 19 x 23 in. Metric: 13.3 x 48 x 58.47 cm |