Water Level Meters | Water Level Equipment

Solinst Model 101

Solinst Model 101 Water Level Meter - 3/8" (10 mm) Diameter Probe. Available in 30 ft to 6000 ft lengths. View Product Details/Place an Order »

Solinst Model 101M

The Mini 101 Water Level Meter is a very compact and easy to carry meter available in 65 ft (20 m) lengths. A choice of probes with extra weights has a maximum diameter of 0.313" or 0.375" (7.9 mm or 9.5 mm). The narrow tape is accurately marked each 1/100 ft or 1 mm. It is ideal for use in any narrow diameter application, where high accuracy is desired. View Product Details/Place an Order »

Solinst Model 102

The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. View Product Details/Place an Order »

Solinst Model 103

The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells.

It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well.

View Product Details/Place an Order »

Solinst Model 107

The TLC Meter is ideal for profiling conductivity and temperature in wells and open water. It displays accurate measurements of conductivity and temperature on a convenient LCD display that rotates for ease of reading.
Water level and probe depth measurements are read off the accurate Solinst flat-tape marked every 1/100 ft or each millimeter. View Product Details/Place an Order »

Heron dipper-T

Heron dipper-T Water Level Meter- 5/8 inch (16mm) Diameter Probe. Available in 50ft/15mm to 3500ft/1500m lengths. View Product Details/Place an Order »

Testwell WLM

Testwell Water Level Meter features a 7/16 " probe. Available in 50 - 2000 feet lengths. View Product Details/Place an Order »

Heron Water Tape

A tough economical water level meter.

The low cost and durability of the water tape make it an ideal choice for well drillers, pump installers and other severe service users.

The water tape is designed and built with the same attention to quality and value as other Heron Products.

• Three year warranty
• Enviro Bag (included)
• Longer Tape Lengths available

View Product Details/Place an Order »

Heron Skinny Dipper

This rugged unit is intended for use in narrow tubes and piezometers. The tape on the skinny dipper is a narrow 0.24 inch x 0.133 inch (6.2 mm x 3.4 mm). The probe is 0.25 inch (6.25mm) diameter stainless steel. This thin section enables the skinny dipper to be used in tubes as narrow as 0.375 inch (9.5mm) internal diameter.

View Product Details/Place an Order »

Heron Little Dipper

A small low cost water level meter with all the quality features of the larger units. The fully submersible standard 5/8 inch (16 mm) dia probe makes it an ideal instrument for narrow piezometers, direct push equipment and standpipes. The compact size and light weight of the little dipper is an advantage for carry in sites where portability is a concern.

View Product Details/Place an Order »

WL650 SONIC WATER LEVEL METER

Global Water's WL650 Sonic Water Level Meter is a self-contained, battery operated meter that uses sound waves to measure well water level. Fast, accurate measurements are possible in the field or anywhere without the use of down-hole water level meters. The Sonic Water Level Meters are lightweight, compact, versatile, and easy to operate. View Product Details/Place an Order »