24/7 Technical Support
Tramex has been manufacturing moisture meters for over thirty years. They had designed and developed the world’s first non-destructive moisture detector working on the principle of impedance measurement using direct contact electrodes. Tramex has remained one of the best and most respected manufacturers in the business and a trusted Pine vendor.
Tramex

 

Tramex Products

TRAMEX SURVEY ENCOUNTER
TRAMEX SURVEY ENCOUNTER
 
The Survey Encounter, made by Tramex, is the world's most advanced meter for finding moisture behind and underneath wood, plaster, brick, carpeting, vinyl flooring, ceramic tile - even the backside of drywall. The Survey Encounter operates on the principle of non-destructive electrical impedance to give accurate non-destructive moisture readings from five to thirty percent in wood and relative readings for walls, rooking and other construction materials. You will never have to drill a hole in a wall or floor again. Move the meter along the surface of any construction material and track a leak to its source. The Survey Encounter stores up to 625 readings in 25 files. It rents with software that downloads data to a PC for spreadsheet analysis on graphs and charts.

Tramex Prof. Pin-Type Meter
Tramex Prof. Pin-Type Meter
 
The Professional Pin-Type Moisture Meter is a handheld instrument designed to take precise measurements of moisture content in wood and wood products. The professional works on the principle of DC resistance., when the electrode pins are pressed into the wood, the electrical resistance between the electrodes is measured and indicated on the digital display. The level of resistance is accurately measured by the instrument, which translates it into a percentage of dry weight moisture content. The Professional gives moisture readings from 6 to 44%. It should be noted that readings above 27% (nominal value of fibre saturation point) are indicative only. Readings are given to the nearest 0.1%.

Tramex Concrete Meter
Tramex Concrete Meter
 
The Tramex Concrete Moisture Encounter is a non-invasive meter which is placed directly on the surface to measure moisture in concrete, sand/cement or gypsum screeds. It is used in the flooring and other industries where it is important to know the moisture content of concrete before a coating or covering is applied. The Concrete Moisture Encounter operates on the principle of non-destructive impedance measurement. Parallel coplanare electrodes fitted with spring-loaded contacts are mounted on the base of the instrument. During operation, a low frequency signal is transmitted into the concrete or floor screed to measure the change in impedance cased by the presence of moisture.