Ready to Support Professionals Responding to Hurricane Irma & Harvey

We at Pine would like to express our thoughts and concerns to all who have suffered during the recent hurricanes Irma and Harvey. We are here and ready to support our customers with all equipment, supplies and service support needed for crisis response cleanup.

24/7 Technical Support

Grundfos

An annual production of more than 16 million pump units makes Grundfos one of the world’s leading pump manufacturers. Circulator pumps for water supply are some the main products Grundfos supplies to Pine. Not only does this company top quality products but has a sound commitment to the environment as well through their Grundfos Brings Water2Life program support of the “Caring for Climate” initiative where they have committed to never emit more CO2 than they did in 2008.
Grundfos

 

Grundfos Products

GRUND REDIFLO MINI-REEL 100'
GRUND REDIFLO MINI-REEL 100'
 

This pump does it all. The smooth, uninterrupted flow of the Redi-Flo2 submersible pump makes it ideal for groundwater purging or sampling, and conducting aquifer tests to a depth of 100 feet. The adjustable flow rate on the Redi-Flo2 lets the operator purge and sample in a single uninterrupted stream. A powerful nine gallons per minute capacity can be dialed in without throttling. When purging is complete, the flow rate can be changed to a low flow of 100ml per minute, providing maximum control over sampling. Constructed of stainless steel and Teflon, the pump meets all specifications for environmental applications. Motor leads are available in 100, 200 and 300 foot lengths.


GRUNDFOS 200'W/REEL
GRUNDFOS 200'W/REEL
 

This pump does it all. The smooth, uninterrupted flow of the Redi-Flo2 submersible pump makes it ideal for groundwater purging or sampling, and conducting aquifer tests to a depth of 250 feet. The adjustable flow rate on the Redi-Flo2 lets the operator purge and sample in a single uninterrupted stream. A powerful nine gallons per minute capacity can be dialed in without throttling. When purging is complete, the flow rate can be changed to a low flow of 100ml per minute, providing maximum control over sampling. Constructed of stainless steel and Teflon, the pump meets all specifications for environmental applications. Motor leads are available in 100, 200 and 300 foot lengths. The Mini-Reel is a smaller alternative to the 100-feet standard-sized reel, for easy transport to remote locations.


Grundfos Redi-Flo 3 Submersible Pump SQ, SQE & SQE-NE
Grundfos Redi-Flo 3 Submersible Pump SQ, SQE & SQE-NE
 

The Grundfos  Redi-Flo3 pump is the most versital and easy to install environmental remediation pump on the market today. Redi-Flo3 pumps use an advanced electronically controlled "smart motor". With the combination of integrated electronics and along with optional CU 300 control box and R100 remote, the user has communication with the  pump through the standard power leads. This feature allows the use of multiple sensors, relays, or digital imput without the additional controls that cost a lot of money! Add a level transducer to the CU 300 and maintain the pumping level you program, speeding up or slowing down as needed. Amazing! Or add a digital flow meter and you have your Redi-Flo3 stop pumping after the gallons you require were pumped. With the Grundfos Redi-Flo3 environmental pump you have complete control.

Permanent-Magnet Motor
Redi-Flo3 pumps use the Grundfos “Smart Motor”. This permanent-magnet motor is single phase input and with a 2-wire design makes installation easy. The combination of integrated microelectronics in the pump with the optional CU300 status box and R100 at the surface allows communication with the pump through
standard electrical motor power leads. No additional wires are required. This feature allows the direct use of multiple sensors, digital input and relays without adding extra control electronics and costs.

Advanced Electronics
By combining advanced electronics, permanentmagnet motors, and Grundfos’ own micro-frequency converter, we are now able to control and communicate with pumps in ways never before possible. A few of the features that come out of this combination are Fluid Level Control, Soft-Start and integrated Dry-Run Protection.

Status Box/R100 Infrared Remote
The optional Redi-Flo3 status box and R100 at the surface allows you to communicate with the pumps integrated electronics through the standard power leads. No additional wires are required! This feature provides the direct use of multiple sensors, digital input and relays without adding any extra electronics and cost. Pump status readout and parameter changes can easily be performed at the surface with the R100 or the Redi-Flo3 PC Tool.

Rugged Design
Redi-Flo3 pump design uses “floating” impellers. Each impeller has its own tungsten carbide/ceramic bearing. This design and the environmentally tough 316 stainless steel and PVDF construction provide excellent wear resistance and solids handling capability.

Reliable Check Valves
Reliable built-in spring loaded check valves let you operate the pump in any position from vertical to horizontal.

Performance Comparison

Multiple models and capacities are available from Pine.  Please call your local branch for a full listing.