24/7 Technical Support
Power Pro ESP Electric Pump QED Get Quote
 
Question?

 

 

The Power Pro ESPTM low-flow electric sampling pump has an all-in-one design with user friendly controls built into the reel. You won't need a heavy AC generator – just run the Power Pro off your vehicle's battery, or go mobile in the field using a portable 12 VDC battery. The ESP Communications ProtocolSM provides simple pump operation with sophisticated control. The In-Water Sensor lights up when the pump is submerged, making it easy to position the pump in the well. The Run-Dry Protection limits drawdown and prevents damage to the motor and seal.

With its variable-speed brushless motor and revolutionary high-efficiency impeller, the Power Pro delivers a new generation of performance. This unique combination consumes 50-75% less power (based on manufacturer's published specifications) which means less heat and lighter, more flexible power supply options. The whole system weighs only 32 lbs.

Key Features

  • Less heat, and lighter, more flexible power supply options
  • Unique, all-in-one design
  • Run the Power Pro off your vehicle's battery or go mobile in the field by using a small, portable battery
  • Controls built right into the reel
  • System can weigh up to 35% less than a traditional pump and controller
  • Variable-speed brushless motor
  • No need for an external AC generator
  • Uses 50-75% less power

Technical Specifications

Model Number EP150
Flow (max) 1.1 gpm (4.2 Lpm)
Flow at max depth 0.5 gpm (1.9 Lpm)
Power Consumption 35-75 watts (typical)
Supply Voltage 12VDC
Current Draw 3-6 amps (typical)
Cable Insulation Polyurethane
Discharge Port 1/4" FPT
Discharge Tubing 1/2" OD (1.3 cm) x 3/8" ID (1.0 cm) and 3/8" OD (1.0 cm) x 1/4" ID (0.6 cm)

Dimensions

  US Metric
Diameter 1.8 in 4.6 cm
Length 16.6 in 42.16 cm

Weight

  US Metric
Pump Weight 5.3 lbs 2.40 kg
System Weight 31.8 lbs 14.42 kg