With its bright, very large, AMOLED display the Cygnus DIVE is simple to operate, providing accurate and reliable thickness measurements, underwater. Depth rated to 300 metres.
Available with data logging, topside, HelmetView™ and twin crystal probe options.
MSI™ Measurement Stability Indicator - this is a feature exclusive to the Cygnus. When using the DIVE Gauge in Single-Echo and Echo-Echo modes, MSI™ confirms when a reading is stable by turning the thickness measurement numbers from red to yellow.
|Display:||\n2.8” quarter VGA colour AMOLED (320 x 240 pixels)\nLarge clear thickness measurement (15 mm high numbers), viewable from all angles\nA-Scan|
|Battery:||Single 3.6V Li-ion 8.2 W battery\n11 hours continuous measurement\nLow battery warning ‘alert’ message|
|Measurement Modes:||Multiple-Echo (three back-wall echoes) using Single Crystal (zero-degree) probes automatically ignores surface coatings and measures only me|
|Deep Coat:||In Multiple-Echo mode, allows measurement to be made through thicker coatings of suitable materials of up to 20 mm thick|
|Accuracy:||±0.1 mm (±0.004”) or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with Cygnus Instruments calibration|
|Probes:||Single Crystal probes:\n2.25 MHz 13 mm (standard) S2C\n2.25 MHz 19 mm S2D\n3.5 MHz 13 mm S3C\n5.0 MHz 6 mm S5C\n\nTwin Crystal probes:\n2.0 MHz 13|
|Probe Cables:||Double outer jacket in tough PU. Coloured yellow for easy locations underwater. Coiled for ease of use. Fischer S105 series connectors.|
|Measurement Ranges:||Multiple-Echo (through coatings) with Single Crystal probes:\n2.25 MHz = 3.0 to 250 mm\n3.5 MHz = 2.0 to 150 mm\n5.0 MHz = 1.0 to 50 mm\n \nEcho-|
|Measurement Resolution:||0.1 mm - Low resolution mode or measurement >99.95 mm\n0.05 mm - High resolution mode and measurement <100.0 mm\n0.01 mm - Single-Echo mode on|
|Measurement Units:||mm or inches|
|Probe Zero:||Fully automatic probe zeroing for all probes types|
|V-Path Correction||Automatic V-Path correction for all Twin Crystal probes|
|Velocity Range:||2000 to 9000 m/s in 1 m/s setps|
|Pulser:||Twin channel 70 V spike pulser|
|Receiver / Amplifier:||10 MHz bandwidth, 120 dB range, automatic TCG\n60 MHz measurement time-base|
|Datalogging:||One-handed automatic logging of stable measurements. Capacity for up to 5,000 points including 640 point A-Scan data.|
|Data Output:||RS-485 single pair, half duplex for surface connection|
|Computer Software:||CygLink v4 allows remote logging and viewing of A-Scan graphs. Survey and report generation to PDF file. Graphic analysis of data and stati|