24/7 Technical Support
RKI Eagle 2 (6-Gas Sample Drawing Monitor) RKI Get Quote
 
Question?

 

 

RKI is proud to offer the next generation of our popular EAGLE portable gas detector. Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO.

The EAGLE 2 available features include a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases; % volume capability for CH4 and H2 using a TC (thermal conductivity) sensor; ppm or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2 (ppm or % volume), methane or hydrocarbons in LEL and % volume ranges; Optional LEL / ppm H2 specific sensor, methane elimination feature for environmental applications; and a variety of super toxic gases.

Key Features

  • Intrinsically safe design, CSA approval
  • Ergonomic RFI / EMI / chemical / weather resistant enclosure
  • External probe with hydrophobic filter
  • Internal hydrophobic dust filter
  • Auto calibration / single gas calibration
  • Datalogging standard
  • Password protection
  • Alkaline 16 hours or NiMH 18 hours capability
  • Methane elimination for environmental use
  • Low flow pump shut off and alarm
  • Powerful long-life pump up to 125’ range
  • Multilingual (5 languages)
  • H2 Specific LEL/PPM detection
  • PPM, % LEL, or % Vol. auto-ranging combustible detection
  • PID (Photoionization Detector) - low or high range for VOC detection, Ifrared (IR) CO2, % LEL CH4, % Vol. CH4, % LEL HC, % Vol. HC, Thermal Conductivity (TC) % Vol. H2, % Vol. CH4, Smart toxic, plug and play sensors NH3, AsH3, CI2, HCN, PH3, & SO2
  • Monitor up to 6 different gases

Technical Specifications

Enclosure: Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-PBT blend. Can operate in 2.0” of water without leakage. Ergono
Weight: \n3.8 Lbs (standard 4 gas with batteries)
Detection Principle: Catalytic combustion, electrochemical cell, galvanic cell, infrared, photo ionization detector, and thermal conductivity.
Sensor Life: \n2 Years under normal conditions.
Sampling Method: Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH
Display: 3 display modes: display all gases, large font-autoscroll, or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminat
Language: Readout can display in 5 languages (English, French, German, Italian, or Spanish.
Alarms: \n2 Alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset, and sile
Alarm Method: Buzzer 95 dB at 30 cm, four high intensity LED’s.
Controls: \n4 External glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak h
Continuous Operation: At 70°F, 16 hours using alkaline batteries, or 18 hours using Ni-MH.
Power Source: 4 Alkaline or Ni-MH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines).
Operating Temp. & Humidity: -20°C to 50°C (-4°F to 122°F), 0 to 95% RH, non-condensing.
Response Time: 30 Seconds to 90% (for most gases) using standard 5 ft hose.
Safety Rating: Intrinsically Safe, Class I \nGroups A, B, C, D.\n\nApprovals: CSA / CE
Standard Accessories: Shoulder strap, alkaline batteries, hydrophobic probe, and 5 foot hose, internal hydrophobic filter
Optional Accessories: \nDilution fitting (50/50)\nNi-MH batteries\nBattery charger, 115 VAC, 220 VAC, or 12 VDC (charge time 4 hours) with continuous operation func
Warranty: \nTwo year material and workmanship, one year for PID sensor

Dimensions

  US Metric
Dimensions \n9.5” L x 5.25” W x 5.875” H -