24/7 Technical Support
Teledyne Model T200 Chemiluminescence NO/NO2/NOx Analyzer Teledyne API Get Quote



The Model T200 NO/NO2/NOx analyzer uses the proven chemiluminescence detection principle, coupled with state-of-the-art electronics to allow accurate and dependable low level measurements for use as an ambient analyzer or dilution CEMS monitor.  A unique AutoZero feature provides superb stability by continuously correcting for zero drift, while advanced Adaptive Filtering allows the analyzer to optimize performance under changing conditions. The Model T200 includes a permeation inlet dryer for ozone generation to provide excellent reliability with no periodic replacement required. A catalytic exhaust ozone scrubber is standard for maximum safety and pump life.  All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/0, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports either locally or by remote connection using the Ranges: 0-50 ppb to 0-20 ppm,
user selectableincluded APIcom™ software.

Key Features

  • Ability to log virtually any operating parameter
  • Comprehensive internal data logging with programmable averaging periods
  • Internal zero & span check (optional)
  • Temperature & pressure compensation
  • Adaptive signal filtering optimizes response time
  • 8 analog inputs (optional)
  • Front panel USB connections for peripheral devices and firmware upgrades
  • Ethernet, RS-232, and (optional) USB com ports
  • Large, vivid, and durable color graphics display with touch screen interface
  • Independent ranges and auto ranging
  • Two-year warranty
  • Ranges: 0-50 ppb to 0-20 ppm, user selectable

Technical Specifications

Ranges: Min: 0-50 ppb Full scale\nMax: 0-20,000 ppb Full scale (selectable,\nindependent NO, NO2, NOx ranges and auto\nranging supported)
Measurement Units: ppb, ppm, µg/m3, mg/m3 (selectable)
Zero Noise: < 0.2 ppb (RMS)
Span Noise: < 0.5% of reading (RMS) above 50 ppb
Lower Detectable Limit: 0.4 ppb
Zero Drift: < 0.5 ppb/24 hours
Span Drift: < 0.5% of full scale/24 hours
Lag Time: 20 seconds
Rise and Fall Time: < 60 seconds to 95%
Linearity: 1% of full scale
Precision: 0.5% of reading above 50 ppb
Sample Flow Rate: 500 cm3/min ±10%
Power Requirements: 100V-120V, 220V-240V, 50/60 Hz
Analog Output Ranges: 10V, 5V, 1V, 0.1V (selectable)
Recorder Offset: ±10%
Included I/O: 1 x Ethernet: 10/100Base-T\n2 x RS232 (300-115,200 baud)\n2 x USB device ports\n8 x opto-isolated digital outputs\n6 x opto-isolated digital inp
Optional I/O: 1 x USB com port\n1 x RS485\n8 x analog inputs (0-10V, 12-bit)\n4 x digital alarm outputs\nMultidrop RS232\n3 x 4-20mA current outputs
Operating Temperature Range: 5 - 40ºC (with EPA Equivalency)
Dimensions (HxWxD): 7” x 17” x 23.5” (178 x 432 x 597 mm)
Weight: Analyzer: 40 lbs (18 kg)\nExternal pump: 15 lbs (7 kg)
US EPA: RFNA-1194-099
MCERTS: Sira MC 050068/05
EN 14211 TÜV Rheinland