24/7 Technical Support

ThermoFisher Scientific NEW TVA2020 with GPS and BlueTooth Connectivity

Pine Item #: 55377
ThermoFisher Scientific NEW TVA2020 with GPS and BlueTooth Connectivity Thermo Scientific Get Quote



Easy-to-Own and Operate

The TVA2020 Analyzer is 21% lighter than earlier models and more compact than most FID stand alone instruments. The lightweight and compact design reduces fatigue for true portability and is easier to service in the field. In addition, a variety of options are available such as a basic or enhanced probe, carrying case, and hydrogen refill assembly.

Optional Bluetooth communication transmits concentration data to a handheld device containing the LDAR software database thereby eliminating the need to transfer files post-monitoring and provide a greater access to route information.

The Technology You Expect

Configurable for use in diverse applications including U.S. EPA Method 21 monitoring, site remediation, landfill monitoring, and general area surveys, the TVA2020 Analyzer is equipped with an FID to measure organic compounds with high sensitivity. The FID technology allows for a wide dynamic and linear range that produces stable and repeatable responses. The analyzer can be configured with both FID and PID technology for simultaneous detection and enhanced analytical capabilities. This dual configuration is capable of producing a more rapid reading of organic and inorganic compounds as opposed to a single detector technology and provides more comprehesive gas coverage than comparable size devices.

After performing a primary calibration, the TVA2020 Analyzer can be customized by activating internal logging parameters, uploading a monitoring route, establishing a bluetooth connection, setting alarm levels, and activating response factors.

Key Features

  • Bluetooth Connectivity
  • Increased user-serviceability
  • GPS
  • Reduced Response Times

Technical Specifications

Accuracy FID Instrument–±10% of reading or ±1.0 ppm, whichever is greater, from 1.0 to 10,000 ppm \nPID Instrument–±20 % of reading or ±0.5 ppm, which
Components Measured Most organic and inorganic compounds
Computer Requirements USB port, Windows XP operating system or higher
Concentration Measurement Range FID: 0-30,000 ppm (methane) PID: 0-2,000 ppm (isobutylene)
Data Logging Averaging Periods Auto mode - 1 per second to 1 per 999 minutes, user selectable\nVOC or FE Mode - 2 to 30 seconds, user selectable
Description TVA2020 Toxic Vapor Analyzer
Flow Rate 1L/min., nominal at sample probe inlet
Height (English) 11.5 in
Height (Metric) 29.2 cm
Hertz 50/60
Inputs Bluetooth, USB
Depth (English) 4 in.
Depth (Metric) 10.2vm
Outputs Bluetooth, USB
Repeatability FID Instrument - 2% at 500 ppm of methane \nPID Instrument - 1% at 100 ppm of isobutylene
Serial Interface USB
Voltage 100-230 V
Weight (English) FID only—9.2 pounds\nDual—9.4 pounds
Weight (Metric) FID only— 4.17 kg\nDual— 4.26 kg
Width (English) 9 in.
Width (Metric) 22.9 cm
Analysis Time T90 = 3.5 seconds
Battery Life The battery operating time is 10 hours minimum at 0 °C (32 °F). Fully charged in less than 10 hours. - See more at: https://www.thermoscient
Battery Type Lithium ion
Calibration Kit Part Number for FID: CR009UY \nPart Number for dual detector: CR012UH
Detector Type FID or PID/FID
Fuel 99.99% H2 for FID
Min. Detectable Limit The minimum detectable level is defined as seven times the standard deviation of peak-to-peak noise.\nPID Instrument - 0.5 ppm of isobutylene
Portable Operation Time Minimum 10 hours
Response Time PID Instrument - Less than 3.5 seconds for 90% of final value, using 500 ppm of isobutylene \nFID Instrument - Less than 3.5 seconds for 90%
Temperature (English) Range 14° F - 113° F
Temperature (Metric) Range -10°C - +45°C
Warranty One year from date of shipment