The well-established and proven ultrasonic thickness gauge DMS Go is available with joystick operation or as the new DMS Go+ with arrow-key operation. The DMS Go and the new DMS Go+ are both ultra-portable and ultra-powerful thickness gauges.
Both units have a small protected hand-held housing with the biggest A-Scan display in its class and features which are essential for inspections based on common codes and standards.
The new DMS Go + is the youngest member of the DMS Go family equipped with an arrow-keypad and the latest industrial electronics to provide accurate, reliable and comprehensive thickness inspection data.
Apart from the different operational devices the joystick or the arrow-keypad, the operation and the menus of both instruments are the same. The accessories are inter-changeable with both instruments. And even the stored instrument settings of the DSM Go can be used with the newDSM Go + and vice versa.
The DMS Go+ uses the same operating platform and hardware as the state-of-the-art USM Go+ portable flaw detector. Both DMS Go and DMS Go+ thickness gauges can be easily converted into comprehensive flaw detectors with a simple software upgrade.
High performance thickness measurement
High capacity data recorder and compatibility with powerful data management systems
Ease of use
|DISPLAY||5 inch diagonal,\n800 x 480 pixels,\n108 × 65 mm (W x H)|
|SIZE (W x H x D)||175 x 111 x 50 mm (W x H x D)|
|WEIGHT||850 g with battery|
|PROTECTION CLASS||IP 67|
|OPERATING TEMPERATURE||0 – 55 °C|
|BATTERY||Li-Ion, rechargeable, > 8 hours operation time|
|POWER ADAPTER / CHARGER||100 – 240 V AC, 50/60 Hz|
|PROBE CONNECTOR||Dual Lemo-00 (T/R)|
|PC INTERFACE||Micro USB|
|MEMORY CARD||SD-Card 16 GB max|
|DATA RECORDER||100.000 readings per file. Multiple files can be stored on SD card in 8 file formats with user selectable A-Scan, B-Scan, and micro-grid att|
|PULSER||120 – 250 V,\nSpike wave,\nAutomatically matched to probe|
|PULSE REPETITION FREQUENCY||4, 8 or 16 Hz selectable|
|RECEIVER||110 dB dynamic, automatic gain control, Manual –high, -low, -auto|
|MEASUREMENT RANGE||0,4 – 14.000 m/s (0.01 – 551 “)|
|UNITS||mm, inch, µs|
|DIGITAL DISPLAY RESOLUTION||0,01 mm or 0,1 mm (0.001” or 0.01”) selectable|
|MEASUREMENT TECHNIQUES||Zero crossing, IP to 1st echo, multi echo, TopCoat, Auto-V|
|CALIBRATION||One-point, Two-point\nAuto or Manual On-block and Off-block Zero\nAutomatic V-Path correction|
|DISPLAY MODE||Thickness and A-Scan, Temperature corrected thickness, B-Scan,\nMin/Max capture, Differential|
|COMPLIANCE||EN 61010,EN 61326-1, EN 12668\nASTM E 1324, E317, ANSI/NCSL Z 540-1-1994\nMIL-STD 45662A, MIL-STD 2154, EN 15317|