24/7 Technical Support
Voyager FTIR Cart Get Quote
 
Question?

 

 

The Voyager FTIR System was designed for ease of setup and use and completely eliminates the task of assembling the FTIR system on the job site or on-the-fly. The unit was also engineered with accessability and safety in mind, enabling it to run 24 hours a day, 7 days a week while allowing the operator to have nearly full control of the system remotely.  

  • Major components of the system in one 19” mobile rack on wheels
    • FTIR, CPU, KVM, Sample Pump, Particulate filter, Calibration Module, Heater Module
    • Mobile Rack is also the shipping case
    • Remove the doors, plug the unit in, connect heated sample line, test
       
  • Smart Sample Pump Module
    • Integrated PLC / 5x5 Color Touchscreen
    • Monitors and controls 7 heated zones, 5 available for external heating devices
    • Monitors and controls 8 port Calibration Module
    • Integrated, Calibrated, Mass Flow Controller for Dynamic Spiking
    • Easily accessible particulate filter
    • Failsafe nitrogen purge system to protect FTIR in case of power loss or heated zone failure
    • Virtual remote monitoring and control through Web Browser
       
  • Remote Control Option
    • Verizon Wireless Cellular with Static IP

 

Key Features

  • The Keyboard, Video Monitor, and Mouse are in a 1U tall independent slide configuration which allows the keyboard to slide in while the monitor remains out and visible.
  • The i5 CPU is equipped with a 500Gig hard drive.
  • A 4U space is available in the rack to accommodate the addition of an FID, Hot /Wet O2 or additional Data Logger.
  • The nitrogen purge system will activate on power loss or programmable alarm condition, saving the FTIR from potential condensation contamination.
  • Heater Module is ultra-safe, employing three poll breakers and contactors to guard against over-temp.
  • Ability to measure multiple compounds simultaneously
  • Fast and easy setup

Applications

  • The i5 CPU is equipped with a 500Gig hard drive.
  • A 4U space is available in the rack to accommodate the addition of an FID, Hot /Wet O2 or additional Data Logger.
  • The nitrogen purge system will activate on power loss or programmable alarm condition, saving the FTIR from potential condensation contamination.
  • Heater Module is ultra-safe, employing three poll breakers and contactors to guard against over-temp.
  • Ability to measure multiple compounds simultaneously
  • Fast and easy setup
  • The Keyboard, Video Monitor, and Mouse are in a 1U tall independent slide configuration which allows the keyboard to slide in while the monitor remains out and visible.

Technical Specifications

Sample Pump Module
Power Requirements 120vac, 60Hz, 600 Watts (on startup) / Standard 15A / AC Plug
Dimensions 19” rack mount 19” (W) x 8.75 (H) x 17.25 (D)
Weight Approximately 52.3/lbs
Communications Ethernet Connection RJ45 for communication through local network
Status Lines 6 Status Outputs / 24vdc / Cal Mode, Fault Mode, Standby Mode, Test Mode, Override Mode, FID Pump Status
Control Lines 5 Digital Inputs (Closed Contact Actuated) 1 Control Output (24vdc) for Probe Solenoid option / 2 x DP25 Pin Control Line for the Heater an
Operating Temperature 65° - 80°F
Oven Temp Max 375°F / 191°C
Sample Flow Rate Adjustable up to10 liters per minute through 100’ x 3/8” heated line
Cal Flow Rate Adjustable up to10 liters per minute
Heater Module
Power Requirements 120vac, 60Hz, 120 Watts / Standard 15A / AC Plug
Dimensions 19” rack mount 19” (W) x 5.25” (H) x 16.25” (D)
Weight Approximately 21.50/lbs
Communications DB25 Pin Communication Control Port
Operating Temperature 65° - 80°F
Number of Circuits 6 separate 120VAC / 15A / 60Hz inputs and outputs
Calibration Module
Power Requirements 120vac, 60Hz, 120 Watts / Standard 15A / AC Plug
Dimensions 19” rack mount 19” (W) x 3.5 (H) x 16.25 (D)
Weight Approximately 17.9/lbs
Communications DB25 Pin Communication Control Port
Operating Temperature 65° - 80°F
Maximum Inlet Pressure 50psi
Cal Flow Max 10 liters per minute