24/7 Technical Support
Olympus BondMaster 1000+ Ultrasonic Bond Tester Olympus IMS Get Quote
 
Question?

 

 

The BondMaster 1000+ is a versatile, full multi-mode Ultrasonic Bond Tester with Resonance, MIA, Pitch/Catch mode and new RF display mode. This offers rental users the ability to select the method best suited to inspect the wide variety of composite materials used. Its high performance, lightweight, and rugged durability make it the NDT hire choice for applications in the manufacturing, maintenance and repair of composite structures.

Key Features

  • Trace storage
  • Single Li-Ion battery
  • RS-232 output for printer or computer interface
  • Program storage
  • PowerLinkTM Technology - automatic probe recognition and instrument set-up
  • Lightweight, less than 4lbs. (1.8 Kg)
  • Full Multi-Mode Capability: - Pitch / Catch (Swept, Impulse, RF) - Resonance - MIA - Mechanical Impedance Analysis
  • Customer interchangeable displays: - Hi-Brite Electroluminescent - Monochrome Liquid Crystal - Color Liquid Crystal
  • VGA Output
  • Alarm outputs

Technical Specifications

NULL
Battery Operating Time: 6 to 8 hours
Power Requirements: 85 to 240 volts, 50 to 60 Hz mains. External holder charges batteries outside the instrument. Charging time is typically 4 hours.
Languages English, Spanish, French or German
Analog Output Update: Rate continuous in MIA and resonance modes. Data available at repetition rate in all pitch/ catch modes
Operating Temperature -4 to 140 degrees F
Frequency Range 250 Hz to 1.5 MHz
Gain -10 to 50.0 dB
Test Methods The modes of operation are Pitch / Catch (Swept, Impulse, RF), Resonance, and MIA
Pitch/Catch Swept: Measures amplitude and phase changes using a swept frequency method to detect disbonds. Requires no couplant.
Pitch/Catch Impulse: Measures amplitude and phase changes using a short burst of energy to detect disbonds. Displays information in envelope or vector display fo
Pitch/Catch RF Impulse: Measures amplitude and phase changes using a short burst of energy to detect disbonds. Displays information in envelope or vector display fo
Resonance: Detects disbonds by changes in phase and amplitude of probe resonance. Requires couplant.
Mechanical Impedance Analysis (MIA): Measures the stiffness and mass of the material under test. The output is measured in both amplitude and phase. Requires no couplant.
Alarm Logic Positive or negative alarm gate
Alarm Output 0 V to +3 V HC logic output, switchable audible alarm and front panel annunciator, alarm indicator on probe is standard.
Clock/Calendar Time and date are stored and printed with each waveform.
Screen storage Up to 20 screens can be stored.
Program storage Up to 100 instrument setups
Probe connector 11-pin Fisher
Analog outputs Signals: +/- 5 volt, adjustable offset, not affected by position controls or ZOOM function.
RS-232 Interface Screen printout and computer interface. Baud rate is adjustable from 2,400 to 19,200 baud (9,600 is default).
Classification Based on Class 2 specifications from the MIL-PRF-28800F Handbook
Altitude Maximum operating and nonoperating altitude- 15,000 ft. (4,600 m)
Hazardous Area Operation Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Association Code (NFPA 70), Section 500, and tested

Dimensions

  US Metric
Dimensions 9.5L x 5.5\"H x 3.6\"D\" 215mm x 165mm x 92mm

Weight

  US Metric
Weight 4 lbs. 1.8kg

Consumables

Personal Protective Equipment (hard hats, glasses, reflective vest, etc)
Personal Protective Equipment (hard hats, glasses, reflective vest, etc)