24/7 Technical Support
GE DMS 2 Thickness Gauge GE Inspection Technologies Get Quote



The DMS 2 is the solution to your test problems dealing with corrosion inspections- even, and especially, when it comes to handling demanding and critical test tasks - for example on coated components or at high temperatures.

Technical Specifications

Operating principle Ultrasonic pulse-echo method
Probe zero adjustment Automatic or manually by pressing a key after coupling to zero block
V-path correction Automatic
Measuring Range DMS 2E: .025 to 25.00 (0.6 mm to 635 mm) DMS 2 and DMS 2TC: .008 to 25.00 (0.2 mm to 635 mm) in steel, in standard operation, depending on t
Digital display resolution .001 to .01 inches (0.01 mm or 0.1 mm) (selectable) over the entire measuring range
Operating frequency 32 Hz in MIN-Capture mode and B-scan display mode; 4 Hz or 8 Hz (selectable) in standard setup
Gain Automatic or manual in 1 dB steps
Receiver bandwidth 0.5 to 15 MHz
Material velocity range 39,400 to 393,662 inches/s 1000 to 9999 m/s
Power supply 4 standard batteries (AA 1.5 V), AlMn or NiMH batteries
Operating time With NiMH batteries min. 40 hours (with backlight and operating frequency 4 Hz)
Operating temperature +10 °F to +120 °F -10 °C to +50 °C
Keypad Dust and watertight sealed membrane keypad Housing / battery compartment Impact-resistant, dust- and splash-proof gasket-sealed, IP 54
Display graphic, transflective LCD, 71 mm x 95 mm, 240 x 320 pixels, switchable backlight, adjustable contrast; Digits: 4-digit display, digit heigh
File formats 8 file formats (3 with the DMS 2E); can be configured later Microgrid: subsequent insertion of 2x2 to 9x9 grid per measuring point; 1 to 16


  US Metric
Dimensions 10.1 x 5.1\" x 1.2\"\" 129 mm x 56 mm x 40 mm


  US Metric
Weight 1.95 lbs 885g including batteries