24/7 Technical Support
Fischer MP30 Deltascope Fischer Get Quote
 
Question?

 

 

DELTASCOPE MP30 is used to measure non-ferrous metal coatings (e.g., chromium, copper, zinc, etc.) and paint, enamel or plastic coatings on iron and steel.

The auto averaging mode is used to reduce the effect of surface roughness on the measurement data range. The mean value of an arbitrary number of readings is stored as a single measurement.

Outlier rejection can be enabled to assure the validity of a measurements series statistical evaluation by eliminating outlier measurements which may be caused by faulty probe placement.

The additional matrix measurement mode enables simple storing of associated measurement data by respective data block (according to specific feature), allowing individual measurements to be made a different times. This measurement mode is ideally suited for applications in the steel and automotive

Key Features

  • Simple calibration adjustment to the test area geometry with the ZERO key
  • Automatic probe recognition
  • Easily exchangeable plug-in type smart measurement probes
  • Input of specification limits
  • Outlier rejection to eliminate erroneous measurements
  • Unit of measurement selectable between U.S. and metric units
  • Single measurement mode. Only the mean value of several single readings is stored
  • Standard and matrix measurement mode
  • A maximum of 10,000 measurements can be stored in 1,000 blocks in up to 100 applications. The size of a block can either be selected freely or can be fixed
  • Ability to calibrate on a coating of unknown thickness (for magnetic induction method only)

Applications

  • Input of specification limits
  • Outlier rejection to eliminate erroneous measurements
  • Unit of measurement selectable between U.S. and metric units
  • Single measurement mode. Only the mean value of several single readings is stored
  • Standard and matrix measurement mode
  • A maximum of 10,000 measurements can be stored in 1,000 blocks in up to 100 applications. The size of a block can either be selected freely or can be fixed
  • Ability to calibrate on a coating of unknown thickness (for magnetic induction method only)
  • Simple calibration adjustment to the test area geometry with the ZERO key
  • Easily exchangeable plug-in type smart measurement probes
  • Automatic probe recognition

Dimensions

  US Metric
Size 6.3” x 3.15” x 1.2” 160 x 80 x 30 mm

Weight

  US Metric
Weight 0.51 lbs. 0.23 kg