Pine has Hydrocarbon analyzers capable of Methane/Non-Methane organics determination. Please contact a CEMs representative to discuss our robust offering.
To find out more, please click on a product from the list. At Pine, we specialize in delivering total equipment solutions and providing technical advice on what to rent, and how to use it; the availability of our rental fleet is second to none, and all our equipment is always tested and delivered ready to use.
The CAI Model 600 MHFID Analyzer is designed to continuously measure the total concentration of hydrocarbons or methane within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems. This instrument can measure THC or CH4 in the ppm or percent levels. All internal components are maintained at the oven set temperature preventing condensation. Options for Internal Heated Sample Pump and Internal Zero/Span Solenoid Values are available.
The model 109L analyzer made by J.U.M. Engineering is a compact, heated unit for detecting methane concentrations to EPA Method 25. Model 109L has been designed for applications such as stack gas emissions monitoring, ambient air monitoring to low concentration levels, thermal reactor and combustion emissions monitoring, and raw automotive and diesel exhaust analysis. The dual detector, dual electrometer design provides real-time analysis of methane only (CH4), total hydrocarbons including methane (THC) and total hydrocarbons less methane (NMHC). Individual analog outputs and digital front panel meters are provided for all three gases. The sample pump, sample filter and all pressure and flow regulating components are built in, so additional sample handling equipment is not needed. Note: The model 109L analyzer uses hydrogen fuel, which is a purchased item.
The Thermo 55i & 55c hyrdocarbon analyzer is a back-flush gas chromatography (GC) system designed for automated measurement of methane and nonmethane hydrocarbons. The back-flush GC method used by the Model 55i provides a direct measurement of non-methane cdncentrations. This allows accurate and precise measurement of low levels of non-methane hydrocarbons (NMHC), even in the presence of methane at much higher concentrations. The proprietary column design is unaffected by the oxygen content of the sample, provides complete recovery of low volatility compounds and achieves absolute separation of methane from all C2 compounds.
Now avaliable for rent, VIG model-210 is a microprocessor based, oven heated methane / ethane / nonmethane-ethane / total hydrocarbon gas analyzer designed for high accuracy, sensitivity and stability. The Model-210 uses two independent flame ionization detectors (FIDs), one to measure total hydrocarbons and the second coupled with a GC Column for the separation of the methane, ethane and nonmethane-ethane components. A sample is fed to the analyzer via an internal heated pump to the first FID for a real time total hydrocarbon reading. A portion of the sample is trapped and pushed through a column to separate the methane and ethane components and then to the second FID. Any remaining sample in the column is back flushed through the column to obtain the nonmethane-ethane components. All components that come in contact with the sample through analysis are maintained in a temperature-controlled oven to prevent condensation, and to provide repeatable, reliable performance in the analysis of a wide variety of hydrocarbon concentrations in gaseous mixtures or in ambient air.