24/7 Technical Support

Pine has Carbon Monoxide analyzers capable of measuring PPM, 0-25% and 0-100%. We carry and partner with Thermo Electron, Servomex, and California Analytical Instruments. Please contact a CEMs representative to discuss your sampling needs.

To find out more, please click on a product from the list.  At Pine, we specialize in delivering total equipment solutions and providing technical advice on what to rent, and how to use it; the availability of our rental fleet is second to none, and all our equipment is always tested and delivered ready to use.


California Analytical 602 CO2 Analyzer
California Analytical 602 CO2 Analyzer

The CAI 602 Dual CO2 analyzer is designed specifically for dilution systems in which CO2 needs to be measured in low ppm levels. The analyzer uses a technique based on the infrared absorption characteristics of gases to measure concentration. A single beam of infrared energy is modulated and passed through a sample cell containing the gas to be measured. The beam emerges attenuated by the amount of energy absorbed by the gas in the sample. Changes in the concentration of the gas results in changes in the intensity of the beam. The remaining energy in the beam is passed serially through two cavities of an infrared detector containing the gas of interest and a mass flow sensor. Changes in the intensity of the beam change the pressure differential between the cavities and consequently the balance of the electrical bridge in the detector circuit. Electronic processing of the imbalance of the signal is used to generate an electrical output signal proportional to the concentration of gas measured.

show more

ECOM J2KN Portable Emissions Analyzer
ECOM J2KN Portable Emissions Analyzer

The ECOM J2KN is the “heavy-duty” version of the J2K, with the analyzer and all of it’s outstanding features built into a rugged hard-side, aluminum reinforced case. With wireless remote control, the J2KN’s handheld remote allows complete operation of the analyzer showing all values at a glance, zoom display capability, and plug-in memory up to 256 MB. The tactile keypad guides the operator through the various functions of the analyzer. The remote display feature makes the J2K an ideal emission analyzer where combustion controls are located away from the flue test port on large combustion systems. The J2K can be fitted with up to 5 gas sensors to measure O2, CO, NO, NO2, and Combustibles, along with gas and ambient temperatures, stack draft & pressure, plus calculations of CO2, efficiency, excess air, and oxygen correction to 20%.

show more

Horiba PG250/350 Portable Gas Analyzer
Horiba PG250/350 Portable Gas Analyzer

This latest gas analyzer is both portable and MCERTS approved. Capable of measuring five components, the Horiba PG-250 and the PG-350 is a highly reliable and versatile gas analyzer for compliance testing of NOx, SO2, CO, CO2, and O2. Housed in a single lightweight and fully portable case, it utilizes the same measurement principles as permanently installed CEMS - unlike other portable gas analyzers that rely upon electro-chemical sensors.

show more

Horiba PG-350E Portable Gas Analyzer
Horiba PG-350E Portable Gas Analyzer

The PG-350E achieves measurement performance equal to laboratory equipment in a highly portable package. As part of the PG-300 series, the PG-350E is a compact stack gas analyzer that can simultaneously measure up to five separate gas components. The approximately 20% lighter body from the previous PG-250-model is optionally protected by rugged side guards, which prevent the analyzer from shocks and damages. PG-350E covers NOX, SO2, CO, CO2 and O2 - measurement and is operating according to: DIN EN 15267 - 3, DIN EN 14181 and
approved as Standard Reference Method (SRM) for:
CO (DIN EN 15058)
O2 (DIN EN 14789)
NOX (DIN EN 14792)

The field conscious design supports whatever the measurement scene is. An optional electronic cooler unit is available for long-term measurement under tough environments such as gas turbines, boilers, and incinerators facilities.

 

show more

Servomex 1440 CO2
Servomex 1440 CO2

The 1440 STD Carbon Dioxide Gas Analyzer is available for non-flammable, non-toxic sample gases. The analyzer comprises one or two measurement modules, each featuring a high visibility LED display. 0-1VDC non-isolated and 4-20mA isolated outputs, and user controlled concentration alarms, all as standard. The non-toxic, non flammable analyzer (STD version) also includes a low flow alarm (indicated by an LED on the analyzer front panel) and Automatic Flow Control Device (AFCD) to control the sample flow through the analyzer.

show more

Teledyne T803 CO2/O2 Analyzer
Teledyne T803 CO2/O2 Analyzer

The Model T803 CO2/O2 analyzer combines the non-dispersive infrared measurement principle within the model T801 and the proven paramagnetic measurement principle within the T802 in to a single analyzer.  Both technologies give accurate and reliable results combined with product longevity, providing the best price performance value on the market.

The CO2/O2 analyzer is based on widely accepted sensor techniques producing an excellent, rugged product designed for extractive CEM or RATA applications.

All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability.  All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports either locally or by remote connection using the included APIcom™ software.

show more

Thermo 410I
Thermo 410I
The Thermo Scientific Model 410i Carbon Dioxide Analyzer utilizes advanced NDIR optical filter technology to measure the concentration of Carbon Dioxide in stack gas levels. Reporting capabilities are user-selectable for either of the accepted industry standards, straight extractive or dilution sampling methods.For more information about this product, please contact your local Pine office at 800-242-3910.
show more