An air sampling pump is a perfect solution when you need to assess aerosol concentrations of contaminants such as dust, gases or other vapors. Pine offers all of the leading models from trusted brands such as Sensidyne and SKC. We are proud to offer one of the largest selections of aerosol sampling pump to ensure we will have the analyzer to fit your precise need.
To find out more, please click on a product from the list. At Pine, we specialize in delivering total equipment solutions and providing technical advice on what to rent, and how to use it; the availability of our rental fleet is second to none, and all our equipment is always tested and delivered ready to use.
Perfect for dust monitoring the Apex personal sampling pump is available to rent from Pine now. Built to comply to EN1232/MDHS14/3 and NIOSH0600 and with a flow range from 5ml* to 5000ml/min the pump is suitable for most sampling applications including solvent, fume, gases, asbestos and general personal sampling regimes.
With real time LCD display of flow rate, volume sampled, elapsed sample time, ambient temperature, current operating mode and program details and with an all new method of volumetric flow control based on outlet pressure with fully digital control circuitry, the unit offers extremely stable flow control for long periods between calibrations.
This high volume air sampler is designed for area monitoring and clearance sampling, and is an economical tool for environmental testing professionals, abatement contractors, industrial hygienists and safety managers. A breathing zone cassette holder sits on a tripod for testing to AHERA standards. The flow regulator adjusts from three to 20 liters per minute.
For spot measurement more than 500 different gases can be detected. The measurement usually takes between 5 seconds and 15 minutes. Furthermore, the easy-to-use Dräger-Tubes have already been calibrated and form a complementary unit with the Dräger-Tube pumps.
The Dräger Short-term Tubes are used either manually with the Dräger-Tube pump accuro or automatically with the Dräger X-act 5000. The results can then be read directly at the end of the measurement process.
A large number of different gases and vapors can be measured by the Dräger Short-term Tubes. These tubes are used e.g. for the determination of concentration peaks, the measurement of exposures in the inhalation area, the determination of possible leakages as well as for the analysis of air in sewers, shafts, tanks or other confined spaces.air examinations at the workplace in the range of legal limit values.
Mobile spot measurement
This manual pump is used for spot measurements such as the detection of concentration peaks, confined space entry, worst-case scenarios etc.
During the sampling process the substances to be evaluated are firstly accumulated on a suitable carrier material, e.g. activated charcoal, silica gel and so on. The air to be evaluated is thereby drawn over the respective material - with a predefined flow rate and duration. Afterwards, the substances that have accumulated on the carrier material through adsorption or chemisorption are examined qualitatively and quantitatively in the laboratory using instrumental analysis such as gas chromatography.
Functional bellows pump
The Dräger-Tube pump accuro draws in 100 ml per stroke. When measuring, the pump body (bellows) is pressed together completely. The exhaust valve is closed during the opening phase of the bellows so that the gas sample flows through the connected Dräger-Tube into the pump. After the complete opening of the pump body into its original position the suction process is finished. The end of stroke is visible by a pressure-controlled end of stroke indication, located in the pump head.
Frequently, measurements need to take place under extreme conditions, e.g. on ladders, in shafts or when wearing heavy breathing protection. The Dräger-Tube pump accuro can easily be operated with one hand and enables a reliable measurement also in difficult-to-access places.
The automatic tube pump Dräger X-act® 5000 is the first all-in-one solution designed for measurements with Dräger Short-term Tubes and for Sampling Tubes and Systems. Ease of operation and a high degree of reliability compliment the measurement and sampling of gases, vapors and aerosols.
Available to rent for dust monitoring applications the Gilian air personal sampling pumps provides industrial hygienists and safety managers with a tried and true air sampling system for determining worker exposure to particulate, gases or vapors. These comprehensive three-in-one samplers perform filter cassette, single or multiple sorbent tube sampling with constant flow accuracy.
The ultra-compact GilAir 5RC is a versatile pump used for sampling airborne particulates, aerosols and toxic vapors/gases. The GilAir 5RC has three operating modes: constant high flow for filter sampling; constant low flow (with optional Constant Flow Low Flow Module) for single-tube sampling; and constant pressure, mult-flow (with optional Constant Flow Constant Pressure Module) for single or multiple tube sampling. The optional flow modules just attach to the pump.
Available to rent from Pine this high flow product is capable of delivering up to 38 litres per minute in free air and 28.3 litres per minute through the N6 biological sampler. The pump features a 12v DC battery capable of providing up to 1 hour of operation, with an elapsed timer and a provision to secure the N6 sampler to the top of the case.
The ultimate personal air sampling pump delivering enhanced performance, greater versatility, and superior design and comfort.
The Widest Flow Range of Any Personal Air Sampling Pump
Personal Industrial Hygiene Air Sampling PumpThe GilAir Plus features wide dynamic flow and pressure ranges to address all personal air sampling methods with flow ranges between 20 and 5,000 cc/min. With patent pending QuadModeSM air sampling technology, the GilAir Plus can perform both high-flow constant pressure and constant flow (450-5,000 cc/min) and low-flow constant pressure and constant flow (20-499 cc/min) with a single pump without external adaptors. It’s like getting two pumps in one.
PC ApplicationGilAir Plus is a smart air sampling pump that provides ambient or standard temperature and pressure corrected display (STP model) and data-logging for up to 16 sampling events (STP and Datalog model). The pump has high back pressure capability of up to 40" H2O in high flow and up to 25" H2O in low flow. An automatic self check system ensures sample accuracy. In the event of a fault condition, the pump’s selectable automatic fault recovery feature attempts to restart the pump up to 10 times every 3 minutes to determine if the fault condition has been cleared.
Ease of Use
Easy-to-read, backlit displaysAn intuitive menu, keypad interface and large, easy-to-read back-lit display makes adjusting pump settings quick and easy. Once the pump is set up, the keypad can be locked to prevent tampering. Convenient and innovative SmartCalSM feature provides automatic pump calibration.
One-third smaller than traditional personal air sampling pumps and weighing less than 21 oz. (595 g), the GilAir Plus provides superior operator comfort. An integrated belt clip securely attaches the pump in a horizontal position, allowing workers a full range of motion to perform a wide variety of tasks without interference or discomfort.
Multi-pump DocksThe GilAir Plus dock provides charging and communication functions for the STP and data-logging models. Once docked, the PC application allows users to review datalogs, generate sampling reports, manage sampling programs, and create pump set-up profiles that expedite deployment of large pump fleets. The SmartCalSM feature uses the dock as a communication link between appropriate calibration devices and the GilAir Plus. SmartCalSM automates calibration and records pre and post sample calibrations in the pump’s datalog.
Barometric Pressure Compensation
When sampling at altitudes of up to 8,000 feet above or 8,000 feet below sea level, GilAir Plus has the capability of automatically correcting the flow rate for altitude changes to maintain constant flow accuracy of +/- 5% over this barometric pressure range. This feature permits GilAir Plus calibration at ground level and sampling at high elevations or deep mines without loss of flow accuracy or the need to calculate and use manual correction factors. GilAir Plus is the only personal air sampling pump with this capability.
The SKC Vac-U-Chamber is a rigid air sample box that allows sample bags to be filled directly by using negative pressure provided by most personal air sample pumps. Since the air sample does not pass directly through the pump, both pump and sample contamination are eliminated. The Vac-U-chamber's rigid walls will not collapse under vacuum conditions. All surfaces in contact with the sample are constructed of stainless steel or PTFE for inertness.
The result of extensive research and development, the PCXR4 is a constant flow air sampling pump suited for a broad range of applications. With an operating range of 5 to 5000 ml/min (low flow applications of 5 to 500 ml/min require an optional adjustable low flow holder), this battery-operated air sampling pump is ideal for industrial hygiene studies as well as environmental testing.
Ideal for “on worker” short-term or full shift sampling, the AirChek 52 personal sampling pump can be used for STEL, TWA or Ceiling sampling using single sorbent tubes. This unit is the workhorse of air sampling pumps for industrial hygiene studies or environmental testing. This battery-operated pump weighs only 20 ounces, and its modular pneumatic system provides constant flow in a range of 750 to 300 ml/min, reducible to 5 to 500 ml/min with the constant pressure controller. Flow is compensated with up to 25 inches water backpressure and moderated with a built-in pulsation dampener. As backpressure increases, the motor voltage corrects automatically for constant flow, so there is no sacrifice in accuracy, even in dusty environments. If flow is restricted for more than 15 seconds, the pump shuts down automatically, but the timer retains the valid run time.
Accurate air volumes without the need for frequent sample pump adjustments, smooth air flow for high flow (750 to 5000 ml/min), pulseless for low flow (5 to 500 ml/min). Low flow air sampling applications require the optional Adjustable Low Flow Holder (Cat. No. 224-26 series)
Ensure integrity of results with shutdown on low battery, restricted flow, and excess back pressure; all with time-retention
Automatically corrects to maintain a constant flow
For low flow air sampling at 5 to 500 ml/min (requires the 224-26 series Adjustable Low Flow Holder accessory)
Built-in pressure regulator allows up to 4 tubes to be run simultaneously; reduces time in the field; uses fewer pumps
Measures only 5.1 x 4.7 x 1.9 inches (13 x 11.9 x 4.8 cm) and weighs 34 oz (964 gm)
Provides a visible check of pump flow rate during air sampling; the filter assembly with see-through housing and trap protects the pump from debris and reduces maintenance requirements
Provides a minimum of 8 hours of continuous use per charge; battery charge test ensures pump lasts entire shift
Displays battery status, total sample time, delayed start, sample period, sample over, program setup, hold, and fault
Convenient program setup and display read out; interrupt/hold button permits shutdown for breaks, lunch, or to recheck the air sample pump; programmable for delayed start time, intermittent sampling, extended sampling up to 7 days, timed shutdown, and repeatability
Designed for on worker applications; quiet enough for indoor air quality investigations
Perfect for Dust monitoring applications the SKC personal sampling pump (The Sidekick) offers flow compensation, high and low flow sampling, reliability and design features to suit everyday demands in the toughest of industries. Simple things such as the controls being under a ‘snap down’ cover, preventing accidental operation and the smooth lines have proven to be a winner with hygienists and safety managers alike. Intrinsically safe and with a flow range of 5 -3000 millilitres per minute the Sidekick offers the answer in one. The addition of a CPC and low flow adapter provides the option to sample for gases and vapors up to 500 millilitres per minute. This system also has the advantage of supporting multi-tube sampling at the same time from one pump. The ability to sample for different hazards without the need for more than one pump, makes the Sidekick a popular choice.
These PM-10 samplers measure concentrations of suspended particles with a diameter of 10 microns or less, as specified by EPA PM-10, CFR Appendix J to Part 50. Model 6070 uses a mass flow controller to meet the EPA flow rate requirement of 36 to 44 cfm. Model 6070V contains a fixed orifice with a flow rate of 40 to 44 cfm. Both models have a seven-day mechanical timer and can be powered with a generator. A calibration kit is required and may be rented. Quartz fiber filters and silicone grease are also available for purchase.
110 Volt 60 Hetz, Brush style motor, PUF Polyurethane Foam Ambient Air Sampler. TE-PUF Poly-Urethane Foam sampler is a complete system designed to simultaneously collect suspended airborne particulates as well as trap airborne pesticide vapors at flow rates up to 280 liters per minute. The TE-PUF features the latest in technological advances fUS EPA Method :or accurately measuring airborne particulates and vapors.
Both models of the TSP (total suspended particulate) high volume sampler meet EPA requirements for a flow rate between 39 and 60 cfm, as described in CFR, Appendix B to Part 50. The 5170 model operates with a mass flow controller and a flow rate that is user adjustable between 39 and 60 cfm. The 5170V model contains a fixed orifice with a flow rate 42 to 44 cfm. Both models can be powered with a generator. Each sampler has a seven-day mechanical timer and an elapsed time indicator. Each is housed in an anodized aluminum shelter for outdoor environments. A calibration kit is required and may be rented. Glass fibre filters are available for purchase.