24/7 Technical Support

For applications in which the measurement of a known gas is required, Pine offers a broad fleet of the latest single gas monitors.The monitors are also suitable for work under OSHA and COSHH requirements.


To find out more, please click on a product from the list. At Pine, we specialize in delivering total equipment solutions and providing technical advice on what to rent and how to use it; our rental fleet is second to none and our equipment is always tested and delivered ready to use.


Biosystems Toxi Vision IR
Biosystems Toxi Vision IR

The Biosystems Toxi Vision is a durable single-sensor gas detector that features a rugged metal-plated case that is impervious to any weather condition while also providing RFI immunity.

Key Features

Next to safety itself, your most important concern should be the products that provide it. Biosystems Toxi Vision is a durable, single-sensor gas detector that offers consistent, long-term protection and the lowest cost of ownership. The Toxi Vision features a rugged, metal-plated case that is impervious to any weather condition while also providing RFI immunity. One-button operation keeps it simple, requiring only minutes of training to ensure proper operation by workers. Premium features like these deliver longer instrument replacement cycles and exceptional value when compared to lower-quality competitive detectors. Invest in the Toxi Vision for a more cost-effective gas detection program.

Hazards

  • Extreme Environment
  • Explosion
  • Gas, Vapors, Smoke
Historical Brand

Biosystems

Warranty Information

Instrument: Lifetime; Sensors: LEL - 2 years. All other sensors: 1 year. Note: Components which by their design are consumed or depleted during normal operation, or which may require periodic replacement, shall be warranted to be free from defects in materials and workmanship for a period of 1-year from the date of purchase.

show more

Drager CMS Analyzer
Drager CMS Analyzer

The world's only Chip Measurement System (CMS) makes spot measurements as easy as 1, 2, 3: insert chip – start measurement – read measurement result on the LCD display. The Dräger CMS combines the advantages of the Dräger-Tubes® with those of an optoelectronic analysis system. Two components define the system: the analyzer and the substance-specific chip.

The Dräger Chip Measurement System (CMS) is one of the most accurate and reliable portable detection systems currently available for measuring spot concentrations.

It combines an electronic based analyzer with substance specific chips. Each substance specific chip contains 10 individual tests/capillaries, these are filled with a reagent system and is based on Draegers 60+ years experience in colometric chemistry. More than 55 gas-specific chips are available. The CMS Analyzer can store the results of 50 measurements by the DataRecorder integrated within the analyzer, together with relevant data, i.e. measurement substance, concentration, date, time and site of measurement.

The analyzer contains a pump mechanism, microprocessor, optics, and software. The optics read the barcode on an inserted chip and menu-driven instructions for the test appear on the analyzer's LCD. Each analyzer includes a data recorder that will hold the last 50 determinations in memory along with the time/date of sample and a location code.

Simple to use
The Dräger CMS is ready for use after only a brief instruction. It makes no difference which gas or vapor you wish to measure – the instrument is used in the same way every time. The operation is guided by a menu on the display and a single button/switch. The display can be backlit and is available in German, English, French or Spanish. After an automatic system self-test, the analyzer is powered up and the measurement system is immediately ready for operation. Simply insert the chip, perform the measurement and read the measurement result displayed as a concentration on the screen. At the end of the measurement, the chip is automatically ejected from the instrument, and the analyzer shuts down. An audible signal sounds after each operating step. Power is supplied by four standard and easily replaceable batteries which are especially suited to the analyzer's requirements (see technical data). The battery capacity allows for more than seven hours of measurement and is, of course, always displayed on the screen.

Accurate
The principle of mass current measurement ensures that the instrument remains unaffected by fluctuations in air pressure. Because the chips are calibrated before leaving the factory, there is no need for the user to calibrate the Dräger CMS. Any possible temperature and humidity effects are checked during factory calibration. The analyzer is explosion protected and certified in accordance with Cenelec (Europe), UL (USA) and UL/CSA (Canada). In addition, the system is protected against dust and splash water in accordance with IP 54, and is resistant to electromagnetic waves.

Remote-System
To allow measurements at places which are difficult to access, a remote system is available. This comprises of an additional pump and extension hose, and is connected to the back of the analyzer. Because the remote system is activated by its own switch, the system can remain attached to the analyzer. A telescopic probe can also be attached to the Remote-System.
 

show more

Drager PAC III Single Gas Monitor for Ammonia
Drager PAC III Single Gas Monitor for Ammonia

For personnel monitoring under the most demanding hazardous gas conditions, including offshore oil rigs and underground mines, this little instrument is tough to beat for reliability and simplicity. Using Draeger sensor technology, the Pac III provides for reliability and simplicity, as well as being a fast and accurate response to hazardous gas levels, with an attention getting 95 dB alarm. Alarm levels can be set for TWA and STEL. Gas concentration is continuously shown on the high intensity LED. A datalogging kit is an optional rental item. It provides graphic or spread sheet analysis of exposure at TWA, STEL or ceiling values.

show more

Drager PAC III Single Gas Monitor for Carbon Monoxide
Drager PAC III Single Gas Monitor for Carbon Monoxide

For personnel monitoring under the most demanding hazardous gas conditions, including offshore oil rigs and underground mines, this little instrument is tough to beat for reliability and simplicity. Using Draeger sensor technology, the Pac III provides both, as well as providing a fast and accurate response to hazardous gas levels, with an attention getting 95 dB alarm. Alarm levels can be set for TWA and STEL. Gas concentration is continuously shown on the high intensity LED. A datalogging kit is an optional rental item, it provides graphic or spread sheet analysis of exposure at TWA, STEL or ceiling values.

show more

Drager PAC III Single Gas Monitor for Sulfur Dioxide
Drager PAC III Single Gas Monitor for Sulfur Dioxide

For personnel monitoring under the most demanding hazardous gas conditions, including offshore oil rigs and underground mines, this little instrument is tough to beat for reliability and simplicity. Using Draeger sensor technology, the Pac III provides for reliability and simplicity. Using Draeger sensor technology, the Pac III provides fast and accurate response to hazardous gas levels, with an attention getting 95 dB alarm. Alarm levels can be set for TWA and STEL. Gas concentration is continuously shown on the high intensity LED. A datalogging kit is an optional rental item. It provides graphic or spread sheet analysis of exposure at TWA, STEL or ceiling values.

show more

GMD AUTOSTEP + / ISOCYANATES
GMD AUTOSTEP + / ISOCYANATES
The AutoStep Plus is a microprocessor-controlled instrument for leak detection, survey work, area monitoring and emergency response involving isocyanates. The AutoStep produces a color reaction on a paper tape cassette that is gas specific. The alpha-numeric LCD display shows concentration and an 80 dB alarm alerts the user to a preset level of isocyanate exposure. Software is included with the rental unit. The paper tape cassette, which is a purchased item, supplies 16 hours of continuous monitoring. A single tape is used for TDI, MDI or HDI, with the user selecting the gas type. The tape does not have to be refrigerated.
show more

INTERSCAN 1144 0-100/600 CO
INTERSCAN 1144 0-100/600 CO
These battery-operated portable analyzers are workhorses for occupational safety and health professionals. Designed for survey work or continuous monitoring, they are ideal for leak testing, ventilation and board emission checking, backing up a continuous monitoring system or just about anywhere toxic gas is a concern. Each analyzer has an integral sample-draw pump and analog direct-read display. The detection element is an electrochemical voltammetric sensor that delivers highly reliable performance.
show more

INTERSCAN 1183A FOR HYDRAZINE
INTERSCAN 1183A FOR HYDRAZINE
These battery-operated portable analyzers are workhorses for occupational safety and health professionals. Designed for survey work or continuous monitoring, they are ideal for leak testing, ventilation and board emission checking, for backing up a continuous monitoring system or just about anywhere toxic gas is a concern. Each analyzer has an integral sample-draw pump and analog direct-read display. The detection element is an electrochemical voltammetric sensor that delivers highly reliable performance .
show more

INTERSCAN 1280 0-2/0-10PPM HCN
INTERSCAN 1280 0-2/0-10PPM HCN
These battery-operated portable analyzers are workhorses for occupational safety and health professionals. Designed for survey work or continuous monitoring, they are ideal for leak testing, ventilation and board emission checking, for backing up a continuous monitoring system or just about anywhere toxic gas is a concern. Each analyzer has an integral sample-draw pump and analog direct-read display. The detection element is an electrochemical voltammetric sensor that delivers highly reliable performance .
show more

INTERSCAN 1340 0-2/0-10PPM CL2
INTERSCAN 1340 0-2/0-10PPM CL2
These battery-operated portable analyzers are workhorses for occupational safety and health professionals. Designed for survey work or continuous monitoring, they are ideal for leak testing, ventilation and board emission checking, for backing up a continuous monitoring system or just about anywhere toxic gas is a concern. Each analyzer has an integral sample-draw pump and analog direct-read display. The detection element is an electrochemical voltammetric sensor that delivers highly reliable performance.
show more

INTERSCAN 1360 0-2/0-10PPM HCl
INTERSCAN 1360 0-2/0-10PPM HCl

These battery-operated portable analyzers are workhorses for occupational safety and health professionals. Designed for survey work or continuous monitoring, they are ideal for leak testing, ventilation and board emission checking, for backing up a continuous monitoring system or just about anywhere toxic gas is a concern. Each analyzer has an integral sample-draw pump and analog direct-read display. The detection element is an electrochemical voltammetric sensor that delivers highly reliable performance .

show more

INTERSCAN 1545 0-10/0-50PPM NO
INTERSCAN 1545 0-10/0-50PPM NO
These battery-operated portable analyzers are workhorses for occupational safety and health professionals. Designed for survey work or continuous monitoring, they are ideal for leak testing, ventilation and board emission checking, for backing up a continuous monitoring system or just about anywhere toxic gas is a concern. Each analyzer has an integral sample-draw pump and analog direct-read display. The detection element is an electrochemical voltammetric sensor that delivers highly reliable performance.
show more

Interscan 4150-2 NO2 0-20ppm
Interscan 4150-2 NO2 0-20ppm

The Interscan 4000 series digital portable analyzer is a direct-reading, battery-operated unit with integral sample pump. The sample-draw sensor is a high sensitivity 50 to 200 times greater than a diffusion-mode sensor, so a much lower minimum detectability is possible. The detection element is an electro-chemical voltametric sensor, designed for long-term reliable performance. The patented, immobilized two-electrode configuration of the Interscan sensor offers numerous advantages, including no cell rupture or acid damage, the elimination of undesirable sensor noise, particularly when high amplifier gain is required for low concentration measurements as well as, and no reference electrode contamination.

show more

Interscan 4330 ClO2
Interscan 4330 ClO2

The Interscan 4000 series digital portable analyzer is a direct-reading, battery-operated Chlorine Dioxide analyzer with integral sample pump. The sample-draw sensor is a high sensitivity 50 to 200 times greater than a diffusion-mode sensor, so a much lower minimum detectability is possible. The detection element is an electro-chemical voltametric sensor, designed for long-term reliable performance. The patented, immobilized two-electrode configuration of the Interscan sensor offers numerous advantages, including no cell rupture or acid damage, the elimination of undesirable sensor noise, particularly when high amplifier gain is required for low concentration measurements, and no reference electrode contamination.

show more

Interscan 4340-2 chlorine
Interscan 4340-2 chlorine
The Interscan 4000 series digital portable analyzer is a direct-reading, battery-operated unit with integral sample pump. The sample-draw sensor is a high sensitivity 50 to 200 times greater than a diffusion-mode sensor, so a much lower minimum detectability is possible. The detection element is an electro-chemical voltametric sensor, designed for long-term reliable performance. The patented, immobilized two-electrode configuration of the Interscan sensor offers numerous advantages, including no cell rupture or acid damage, the elimination of undesirable sensor noise, particularly when high amplifier gain is required for low concentration measurements, and no reference electrode contamination.
show more

Interscan 4360-1999b HCl
Interscan 4360-1999b HCl

The Interscan 4000 series digital portable analyzer is a direct-reading, battery-operated unit with integral sample pump. The sample-draw sensor is a high sensitivity 50 to 200 times greater than a diffusion-mode sensor, so a much lower minimum detectability is possible. The detection element is an electro-chemical voltametric sensor, designed for long-term reliable performance. The patented, immobilized two-electrode configuration of the Interscan sensor offers numerous advantages, including no cell rupture or acid damage, the elimination of undesirable sensor noise, particularly when high amplifier gain is required for low concentration measurements, and no reference electrode contamination.

show more

Interscan 4360-2 HCl0-19.99
Interscan 4360-2 HCl0-19.99

The Interscan 4000 series digital portable analyzer is a direct-reading, battery-operated unit with integral sample pump. The sample-draw sensor is a high sensitivity 50 to 200 times greater than a diffusion-mode sensor, so a much lower minimum detectability is possible. The detection element is an electro-chemical voltametric sensor, designed for long-term reliable performance. The patented, immobilized two-electrode configuration of the Interscan sensor offers numerous advantages, including no cell rupture or acid damage, the elimination of undesirable sensor noise, particularly when high amplifier gain is required for low concentration measurements, and no reference electrode contamination.

show more

INTERSCAN 4540-199.9m NO
INTERSCAN 4540-199.9m NO

The Interscan 4000 series digital portable analyzer is a direct-reading, battery-operated unit with integral sample pump. The sample-draw sensor is a high sensitivity 50 to 200 times greater than a diffusion-mode sensor, so a much lower minimum detectability is possible. The detection element is an electro-chemical voltametric sensor, designed for long-term reliable performance. The patented, immobilized two-electrode configuration of the Interscan sensor offers numerous advantages, including no cell rupture or acid damage, the elimination of undesirable sensor noise, particularly when high amplifier gain is required for low concentration measurements, and no reference electrode contamination.

show more

ISC STX70 FOR CO
ISC STX70 FOR CO
The STX70, manufactured by Industrial Scientific, was developed in direct response to requests for a light weight, full-function, single-gas monitor, adaptable to a variety of needs. Pine offers the STX70 with sensors for carbon monoxide or hydrogen sulphide. Features include RFI protection, audible and visual alarms, and an easy-to-read top mounted display. ISC’s unique Sewer Guard design houses the STX70 H2S monitor in a watertight, corrosion resistant Pelican carrying case to protect the instrument from wet, highly corrosive hydrogen sulphide environments. The Industrial Scientific STX70 Single-Gas Monitor rents with a certificate of calibration, cal cup, quick start guide, operating manual and carrying pouch. The STX70 is available with carbon monoxide (CO) or hydrogen sulphide (H2S) sensors.
show more

Maxtec UltraMax O2 Oxygen Analyzer
Maxtec UltraMax O2 Oxygen Analyzer

Maxtec is pleased to introduce The UltraMaxO2 oxygen analyzer. The UltraMaxO2 was designed for fast and easy verification of oxygen concentration, flow and outlet pressure of oxygen concentrators. Best of all, the UltraMaxO2 provides unparalleled performance and reliability from its advanced design.

show more

MDA TLD-1 Monitor
MDA TLD-1 Monitor

The ChemKey TLD monitor is ideal for temporary facility monitoring and R&D projects, as well as in spill remediation and emergency response. The unique technology of the instrument uses a chemically impregnated tape that changes color in direct proportion to the amount of gas present, even at parts per billion. The tape provides a direct read of the gas and ignores non-target gases. CHEMKEYS AVAILABLE: (HF) (HCL) (H2S04) (HNO3)

show more

RAE System ToxiRAE PGM-35 Gas Monitor
RAE System ToxiRAE PGM-35 Gas Monitor

Features factory preset and user programmable alarms, STEL, TWA and Peak information for specific toxic gases.

Ranges:

  • 0- 30 % O2
  • 0- 1500 ppm CO
  • 0.2 to 50 ppm Cl2
  • 0.2 to 10 ppm CLO2
  • 0 to 10 ppm O3
  • 0 to 10 ppm PH3
  • 0 to 1999 ppm H2
  • 0.2 to 30 ppm HCL
  • 0 to 500 ppm H2S
  • 0.2 to 150 ppm HCN
  • 0.2 to 150 ppm NO2
  • 0.2 to 150 ppm SO2
  • 0 to 1000 ppm NO
show more

RAE Systems ToxiRAE 3
RAE Systems ToxiRAE 3

The ToxiRAE 3 is a full-featured single-gas monitor that offers unequaled cost of ownership value. The ToxiRAE 3 is compatible with the AutoRAE Lite bump and calibration station. STEL, TWA, low, and high alarms can also be recorded. The detector is warranted for 2 years and maintenance free with replaceable battery.

Overview:

  • Lowest cost of ownership on the market.
  • Rugged steel housing for harsh environments.
  • Fastest instrument response time on the market for better protection and worker safety.
  • Fastest bump station on the market with highest productivity, putting workers back to work quickly.
  • Compact, low-cost bump and calibration station enables the ability to put the bump capability where it is needed.
show more

RAE Systems ToxiRAE PID Personal Gas Monitor for Ammonia
RAE Systems ToxiRAE PID Personal Gas Monitor for Ammonia

The ToxiRAE is the smallest PID ever, tiny enough to clip or slip into a shirt pocket for on-thefly monitoring of VOCs. But don't be fooled, this is no 98-pound weakling. The ToxiRAE is a powerful and fully functional photoionization detector with all the safety features of the big guys, including RFI shielding, large, easy to read back-lit display, an alarm latching mechanism, and a 90 dB buzzer and flashing red LED set to user-programmable conditions. Alarms can be programmed for STEL, TWA and peak information. Pine offers the ToxiRAE single-gas monitors with sensors for chlorine and ammonia. RAE SYSTEMS ToxiRAE PID Model PGM-35 with 10.6 eV lamp rents with a rubber boot, spare battery and operating manual.

show more

RAE Systems ToxiRAE PID Personal Gas Monitor for Chlorine
RAE Systems ToxiRAE PID Personal Gas Monitor for Chlorine

The ToxiRAE is the smallest PID ever, tiny enough to clip or slip into a shirt pocket for on-the fly monitoring of VOCs. But don't be fooled, this is no 98-pound weakling. The ToxiRAE is a powerful and fully functional photoionization detector with all the safety features of the big guys, including RFI shielding, large, easy to read back-lit display, an alarm latching mechanism, a 90 dB buzzer and flashing red LED set to user-programmable conditions. Alarms can be programmed for STEL, TWA and peak information. Pine offers the ToxiRAE single-gas monitors with sensors for chlorine and ammonia. RAE SYSTEMS ToxiRAE PID Model PGM-35 with 10.6 eV lamp rents with a rubber boot, spare battery and operating manual.

show more

RKI SC-01 Single Toxic Gas Monitor
RKI SC-01 Single Toxic Gas Monitor

Built around RKI’s latest smart sensor technology, the SC-01 is a versatile single toxic gas monitor. The smart sensors are interchangeable, with the SC-01 automatically recognizing any sensor change without any set up or configuration changes.  The sensor’s calibration information also stays with each sensor. Weighing only 7.6 ounces, it has many features which set it apart from the competition. For example, it offers sensors for Arsine (AsH3), Ammonia (NH3), Carbon Monoxide (CO), Chlorine (Cl2), Hydrogen Cyanide (HCN), Hydrogen Sulfide (H2S), Phosphine (PH3), and Sulfur Dioxide (SO2). The SC-01’s unique extender cable allows the sensor to be attached to the end of a 10 foot cable for remote monitoring and quick response.  The SC-01’s large LCD display shows the gas reading, battery level, current time, and will automatically backlight in alarm conditions. Standard alarm types include vibration, visual, and audible alarms that can be set to latching or self-resetting.  Controlled by a microprocessor, the SC-01 continuously checks itself for sensor connections, low battery and circuit trouble. The batteries are simple to replace, requiring no tools to access the battery compartment. One set of AA alkaline batteries provides continuous operation for over 250 hours.  The SC-01 is equipped with datalogging capability as a standard feature which communicates through an IR port with an optional Windows® based datalogging software program. Calibration intervals and reminders are user adjustable and can be set to either go into alarm or to lock the user out of normal measurement mode once a calibration period has expired.

show more

T-82 for CO
T-82 for CO

The T82 single-gas monitor made by Industrial Scientific offers superior personal gas monitoring, with no sacrifice of convenience or ease of use. With simplified, single-button operation and calibration, the T82 offers continuous monitoring and simultaneous LCD display of the target gas. The unit is light and compact, RFI shielded and is doubly armed with a 90 dB audible and ultra-bright visual alarm. Datalogging and vibrating alarm also available. The T82 provides STEL and TWA readings. Datalogging up to 90 hours of survey data at one-minute intervals with downloading into a Windows-based software platform, with optional download kit.

show more

T82 Single Gas Monitr HCN
T82 Single Gas Monitr HCN
The T82 Single Gas Monitor offers superior personal gas monitoring of any one of many toxic gases, plus oxygen, making it the ideal rental solution for a variety of toxic gas and vapor detection applications. With its plug-in “smart” sensors, the T82 automatically recognizes and adjusts to any sensor changes. Providing simplified, single-button operation and calibration functions, the monitors provide superior RFI shielding as well as STEL and TWA readings viewable on the top-mounted LCD display. Datalogging versions provide on-board storage of up to 90 hours of survey data and download within a Windows®-based software platform.
show more