Pine carries a full range of the market's leading brands for Radiation and EMF monitoring.
To find out more, please click on a product from the list. At Pine, we specialize in delivering total equipment solutions and providing technical advice on what to rent and how to use it; our rental fleet is second to none and our equipment is always tested and delivered ready to use.
A sophisticated radon gas detector now available to rent, the RAD7 both detects and continuously monitors Radon and Thoron gases. Easy to use the instrument can equally be used both in laboratories and out in the field by radon testers, engineers, consultants and inspectors. Simple to use, the RAD7 has pre-programmed set-ups for common tasks and comes complete with a built-in air pump, rechargeable batteries and printer.
This high sensitivity, general purpose field strength meter was designed for maximum accuracy and ease of operation. It is ideal for measuring electromagnetic fields generated by a wide range of equipment, including RF heat sealers, RF/microwave processing equipment, broadcast stations and medical instrumentation. Readings are displayed on an analog scale. The rental unit comes with two probes, H-field and E-field, that allow measurements down to 0.04 mW/cm2 in order to meet the most recent ANSI standards for uncontrolled environments. The probe design is based on development work done by the electromagnetic fields division of the NIST (National Institute of Standards and Technology).
The 3550 magnetic field monitor is a compact, portable device designed to monitor static (DC) magnetic fields in the workplace. It detects the strong magnetic fields generated by medical diagnostic devices such as MRIs, nuclear fusion experimental devices, metallurgical processes and super-conductive magnets. The monitor provides instantaneous and time integrated field readings, measuring instantaneous fields up to 0.3 Teslas. The time integrating feature tracks 8-hour average exposures to the ACGIH TLV for static magnetic fields. Three-axis isotropic sensing measures the actual field, regardless of instrument orientation.
Make isotropic measurements simply and economically with the Model 3627 three-axis ELF (extremely low frequency) magnetic field meter from Holaday Industries. Signals from the three orthogonal sensing colis combine in a vector sum to provide accurate magnetic field measurements from any ELF source, including single or polyphase electrical circuits, VDTs, household wiring and appliances. The unit's remote sensor and analog meter make quick work of finding ELF distributions in any application, and its wide dynamic range makes it an extremely flexible tool for measurements ranging from home ambient environments to high current factory locations
Pine now have the HI-4433 available to rent. The series probes feature Automatic Continuous Zeroing which removes the need for internal zero adjustment and eliminates temperature drift errors associated with other instrumentation. The Automatic Zero feature allows the meter to be used immediately upon power-up, and eliminates concerns about finding a zero.
This hire package includes the Holaday Model 3604, which is an ELF/power frequency survey meter, the Model 3603, a VLF/VDT radiation survey meter, and the Model 3616 fibre optic remote control, for situations where the surveyor must be isolated from the instrument. An optional dielectric stand is also available for rental.
The Model 3604 ELF (extremely low frequency) field strength meter evaluates electric and magnetic fields associated with 50/60 Hertz power lines and electrically operated equipment and appliances. The 3603 VLF (very low frequency) radiation survey meter is designed for measuring the complex electromagnetic field emissions from computers, video display terminals and any CRT or similar device radiating within 10 KHz to 300 KHz.
The Model 1600 microwave meter accurately measures microwave leakage from microwave ovens operating at 2450 MHz and 915 MHz. Three survey ranges are available, measured values are indicated on an easy-to-read, front panel analog meter. The rental package includes a probe and cable, and plastic beaker for the water load used in testing.
The Ludlum Model 2241-2RK is a portable general-purpose survey meter equipped with a Geiger-Mueller detector for measurement of alpha, beta and gamma radiation. The Model 2241 operated in either Ratemeter Mode with a moving decimal point and six-digit in Scaler Mode. The unit has both visual and audible alarms.
The Model 3 is a portable radiation survey instrument with four linear ranges used in combination with exposure rate, or cpm meter dials. The instrument features a regulated high-voltage power supply, unimorph speaker with audio ON/OFF capability, fast-slow meter response, meter reset button and six-position switch for selecting battery check or scale multiples of Xo.1,X1,X10 and X100. Each range multiplier has its own calibration potentiometer.
The Model 19 is a highly sensitive gamma R/meter employing an internally housed, 2.5 cm diameter by 2.5 cm thick (1.0 x 1.0 in.) NaI detector. The measuring range is 0-50 v/h (0-5000 R/hr). The cast aluminum instrument housing with its separate battery compartment and accompanying metal handle offer an industrial robustness and quality that promote long lasting protection and instrument life.
The front-panel controls include a rotary switch for selecting the five-decade range and instrument shut-off, an audio on/off switch, a fast/slow response switch, and pushbuttons for activating the meter lamp, high-voltage display, battery test, and count reset.
This is Ludlum's best selling, general purpose, handheld analog ratemeter known for accuracy and long-lasting dependability. The analog meter comes in a variety of measurement ranges and units to support the external radiation detector selected.
The aluminum cast instrument housing with its separate battery compartment and accompanying metal handle offer an industrial robustness and quality that promote long-lasting protection and instrument life. The front-panel controls include a rotary switch for selecting the four-decade range, instrument shut-off, battery test, an audio on/off switch, a fast/slow response switch, and a count reset button.
The Ludlum 192 Micro R Meter is a low level ( Micro R ) gamma meter. It features 4 ranges, auto adjust alarm settings and 2' x 1' sodium iodide (naI)T1 scintillator. The 192 Micro R Meter's sensitivity typically is 700 cpm/microR/hr (Cs-137 gamma ). This unit is micro-processor based and has total counting range from 0-5,000 µR/hr.
DoseRAE 2 is a compact, direct-reading and alarming electronic personal radiation detector. It uses a diode and a scintillation crystal to detect X- and gamma radiation, and provides real-time monitoring of personal dose and dose rate. The real-time radiation dose rate monitoring allows immediate reaction in case of radiation occurrences and thus reduces the radiation exposure. By measuring dose equivalent and dose equivalent rate, this radiation detector provides the functions of a dosimeter too. It also measures radiation exposure and exposure rate, which is appropriate for controlling the exposure of emergency responders to photon radiation.Stand-alone electronic dosimeter with LCD display
DoseRAE 2 is a compact, direct-reading and alarming electronic personal radiation detector. It uses a diode and a scintillation crystal to detect X- and gamma radiation, and provides real-time monitoring of personal dose and dose rate. The real-time radiation dose rate
monitoring allows immediate reaction in case of radiation occurrences and can help reduce radiation exposure. By measuring dose equivalent and dose equivalent rate, this detector provides the functions of a dosimeter too. It also measures radiation exposure and
exposure rate, which is appropriate for controlling the exposure of emergency responders to photon radiation.