3Mâ„¢ Air-Mateâ„¢ HEPA Belt-Mounted PAPR System - Matrix
231-01-30U includes:* Air-Mate™ PAPR Unit 520-03-63R01* Battery Pack 007-00-15R01* HEPA Filter 451-02-01R01* Airflow Indicator 021-14-00R01* Vinyl Belt GVP-117 Specifications:Weight* PAPR: Approx. 1.1 lbs.* Battery pack: Approx. 1.7 lbs.Battery Pack* Rechargeable NiCd. Up to 8 hours per charge.These respirators help reduce exposure to certain airborne contaminants. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons, or use not in accordance with the instructions, may adversely affect product performance and result in sickness or death. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance, and only in accordance with their operating and maintenance manuals. Each person using these products must first read and understand the operator’s manual. See supervisor for assistance or call 3M OH&ESD Technical Service in U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Important: Before using these respirators, you must determine the following: 1. If there is sufficient oxygen present. 2. The type of contaminant(s) for which the respirator is being selected. 3. The concentration level of contaminant(s). 4. Whether the respirator can be properly fitted on the wearer’s face. All respirator instructions, warnings and use and time limitations must also be read and understood by the wearer before use. Before use of these respirators, a written respiratory protection program must be implemented, meeting all the requirements of OSHA 29 CFR 1910.134, including training, fit testing and medical evaluation.
SKU
Description
BE-12-3
R Series Tychem® QC Head Cover, regular, white, 522-02-00R03
BE-12L-3
R Series Tychem® QC Head Cover, large, white, 522-02-01R03
BE-12B-3
R Series Tychem® QC Head Cover, regular, blue, 522-02-02R03
BE-12BL-3
R Series Tychem® QC Head Cover, large, blue, 522-02-03R03
BE-10-3
R Series Tychem® QC Hood, regular, white, 522-01-11R03
BE-10L-3
R Series Tychem® QC Hood, large, white, 522-02-17R03
BE-224
Breathing Tube BE-224
AMH-1U
Vinyl Belt-Mounted High Efficiency (HE) Powered Air Purifying Respirator (PAPR) System AMH-1U
231-01-30
Air-Mate Belt-Mounted PAPR Assembly
AMH-12U
Vinyl Belt-Mounted High Efficiency (HE) Powered Air Purifying Respirator (PAPR) System, AMH-12U
520-03-73
Smart Charger, Single Unit
520-03-72
Smart Charger, 5-Unit
520-01-61
Ten Battery Charger, 520-01-61
520-04-24
External Battery Charger Assembly 520-04-24
3Mâ„¢ GVP-Series Belt-Mounted PAPR and Accessories - Matrix
Specifications:Weight* GVP-100 Motor blower: 1.1 lbs. (0.5 kg.)* GVP-111 Battery pack: 2.5 lbs. (1.12 kg.)* Service Time: After 14-16 hrs. charge, up to 8 hrs.* Charging Time: 14-16 hrs., 20 hrs. initialMotor Life* Approximately 2,000 hrs. (depending on conditions)OV = NIOSH approval: Certain organic vaporsAG1 = NIOSH approval: Chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen fluoride or hydrogen sulfide (escape only)AG2 = NIOSH approval: Chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen fluoride or hydrogen sulfide (escape only) These respirators help reduce exposure to certain airborne contaminants. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons, or use not in accordance with the instructions, may adversely affect product performance and result in sickness or death. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance, and only in accordance with their operating and maintenance manuals. Each person using these products must first read and understand the operator’s manual. See supervisor for assistance or call 3M OH&ESD Technical Service in U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Important: Before using these respirators, you must determine the following: 1. If there is sufficient oxygen present. 2. The type of contaminant(s) for which the respirator is being selected. 3. The concentration level of contaminant(s). 4. Whether the respirator can be properly fitted on the wearer’s face. All respirator instructions, warnings and use and time limitations must also be read and understood by the wearer before use. Before use of these respirators, a written respiratory protection program must be implemented, meeting all the requirements of OSHA 29 CFR 1910.134, including training, fit testing and medical evaluation.
SKU
Description
L-501
Bumpcap w/ Wide-View Faceshield L-501
L-503
Bumpcap w/ Welding Shield L-503
L-505
Bumpcap w/ Wide-View Welding Shield L-505
L-701
Hard hat w/ Wide-View Faceshield L-701
L-703
Hard hat w/ Welding Shield L-703
L-705
Hard hat w/ Wide-View Faceshield and Welding Shield L-705
L-901
Helmet w/ Wide-View Faceshield L-901
L-905
Helmet w/ Wide-View Welding Shield L-905
H-410
Hood w/ Collar, Tychem® QC H-410
H-411
Hood Assembly w/ Collar & Cap Suspension, Tychem® QC
These respirators help reduce exposure to certain airborne contaminants. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons, or use not in accordance with the instructions, may adversely affect product performance and result in sickness or death. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance, and only in accordance with their operating and maintenance manuals. Each person using these products must first read and understand the operator’s manual. See supervisor for assistance or call 3M OH&ESD Technical Service in U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Important: Before using these respirators, you must determine the following: 1. If there is sufficient oxygen present. 2. The type of contaminant(s) for which the respirator is being selected. 3. The concentration level of contaminant(s). 4. Whether the respirator can be properly fitted on the wearer’s face. All respirator instructions, warnings and use and time limitations must also be read and understood by the wearer before use. Before use of these respirators, a written respiratory protection program must be implemented, meeting all the requirements of OSHA 29 CFR 1910.134, including training, fit testing and medical evaluation.BE-10 is not certified for use with BP17IS, only with BP15.
Note:Headgear, breathing tube, air control valve and compressed air supply hose are required parts in a NIOSH-approved system. Any NIOSH certification appearing on 3Mâ„¢ components is strictly limited to use in an approved air system and only in full accordance with the specifications and limitations under said approval. NIOSH certifies complete assemblies only, not sub-assemblies.* It is the employer’s responsibility to ensure that the compressed air used with any supplied air system meets the requirements for at least Grade-D breathing air per the Compressed Gas Association Commodity Specification G-7. 1-1997 in the U.S. In Canada, refer to CSA Standard Z180.1 table for the quality of compressed breathing air.
SKU
Description
L-501
Bumpcap w/ Wide-View Faceshield L-501
6800PD
Full Facepiece 6800 PD Series
L-503
Bumpcap w/ Welding Shield L-503
7800S
Full Facepiece 7800S
L-505
Bumpcap w/ Wide-View Welding Shield L-505
6000DIN
Full Facepiece 6000DIN Series
L-701
Hard hat w/ Wide-View Faceshield L-701
7000
Half Facepiece 7000 Series
L-703
Hard hat w/ Welding Shield L-703
6000
Half Facepiece 6000 Series
L-705
Hard hat w/ Wide-View Faceshield and Welding Shield L-705
L-901
Helmet w/ Wide-View Faceshield L-901
L-905
Helmet w/ Wide-View Welding Shield L-905
SA-2000
Back-Mounted Adapter Kits, High Pressure
H-410
Hood w/ Collar, Tychem® QC H-410
SA-2000LP
Back-Mounted Adapter Kits, Low Pressure
H-411
Hood Assembly w/ Collar and Cap Suspension, Tychem® QC H-411
SA-1000
Front-Mounted Adapter Kits, High Pressure
H-412
Hood Assembly w/ Collar and Hardhat, Tychem® QC H-412
SA-1000LP
Front-Mounted Adapter Kits, Low Pressure
H-420
Hood w/ Inner Shroud, Tychem® QC H-420
H-421
Hood Assembly w/ Inner Shroud and Cap Suspension, Tychem® QC H-421
SA-2100
Back-Mounted Adapter Kits, High Pressure
H-422
Hood Assembly w/ Inner Shroud and Hardhat, Tychem® QC H-422
SA-2100LP
Back-Mounted Adapter Kits, Low Pressure
H-610-5
Sealed-Seam Hood w/ Collar, Tychem® SL H-610-5
SA-1100
Front-Mounted Adapter Kits, High Pressure
H-611
Sealed-Seam Hood Assembly H-611, w/ Collar & Cap Suspension
This faceshield can be used with 3M™ Powered Air Purifying Respirator (PAPR) or 3M™ Supplied Air Respirator Systems. Allows the user to wear prescription glasses for greater comfort and acceptance. Provides bumpcap protection and features a wide-view faceshield.
SKU
Description
L-501
Bumpcap L-501 w/ Wide-view Faceshield
3Mâ„¢ Hard hat L-701 with Wide-View Faceshield
This hard hat is used with 3M™ Powered Air Purifying Respirator (PAPR) or Supplied Air Respirator Systems. It can be used in applications where ANSI Type I, II hard hat protection is needed. It has an assigned protection factor of 25 x PEL. Features a wide-view faceshield.
SKU
Description
L-701
Hard hat L-701 w/ Wide-View Faceshield
3Mâ„¢ Hard hat l-705 with Welding Shield and Wide-View Faceshield
This hard hat can be used with 3M™ Powered Air Purifying Respirator (PAPR) or 3M™ Supplied Air Respirator Systems. Meets ANSI Type I, II requirements for industrial protective headgear. It has an assigned protection factor of 25 x PEL. Features a wide-view faceshield and a welding shield.
SKU
Description
L-705
Hard hat L-705 w/ Welding Shield & Wide-View Faceshield
This helmet can be used with 3M™ Powered Air Purifying Respirator (PAPR) or 3M™ Supplied Air Respirator Systems. It meets ANSI Type I, II hard hat requirements. It has shroud options and helps provide an assigned protection factor of 1000 x PEL. Features a wide-view faceshield.
SKU
Description
L-901
Helmet L-901 w/ Wide-View Faceshield
3Mâ„¢ Helmet L-905 with Welding Shield and Wide-View Faceshield
This helmet can be used with 3M™ Powered Air Purifying Respirator (PAPR) or 3M™ Supplied Air Respirator Systems. It meets ANSI Type I, II hard hat requirements. It has shroud options and helps provide protection up to 1000 x PEL. Features a wide-view faceshield and a welding shield.
Used on 3M™ Air-Mate™, 3M™ Breathe Easy™ PAPR and 3M™ BE-Series Supplied Air Hood Systems. This is a lightweight, durable hood that provides protection for a wide range of applications. The BE-10 hood utilizes Tychem® QC for added strength and durability. Assigned protection factor of 1000xPEL.
SKU
Description
BE-10-3
BE-10 Hood, Regular
BE-10L-3
BE-10 Hood, Large
3Mâ„¢ Head Cover BE-12
Used on 3M™ Air-Mate and 3M™ Breathe Easy™ PAPR Systems. This is a lightweight head cover that provides protection for a range of applications. The BE-12 head cover features Tychem® QC for added strength and durability. Assigned protection factor of 25 x PEL.
SKU
Description
BE-12-3
BE-12 Head Cover, Regular
BE-12L-3
BE-12 Head Cover, Large
BE-12B-3
BE-12 Head Cover, Blue, Regular
BE-12LB-3
BE-12 Head Cover, Blue, Large
3Mâ„¢ Lens Cover L-133
Used with the 3M™ wide view lens. The cover fits over the lens and protects it from scratching or overspray of paint and chemicals. Up to five covers can be attached, one on top of the other.
SKU
Description
L-133-100
Lens Cover
L-133-25
Lens Cover
3Mâ„¢ GVP-Series Belt-Mounted PAPR Cartridges
Cartridges are designed to be used with the 3M™ Belt-Mounted and Vehicle-Mounted Powered Air Purifying Respirator (PAPR) Systems. Cartridge attaches to the blower motor and filters the air supplied to the system headgear.These respirators help reduce exposure to certain airborne contaminants. Misuse may result in sickness or death. Before use, the wearer must read and understand User Instructions provided as a part of product packaging. Time use limitations may apply. For proper use, see package instructions, supervisor or call 3M OH&ESD Technical Service in U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.
The half facepiece 6000 series is a reusable respirator that offers the user comfort and convenience. Each facepiece is remarkably comfortable, soft, lightweight and easy to adjust. NIOSH approved for negative pressure air purifying and positive pressure dual airline applications. The half facepieces are each available in 3 sizes: small, medium and large. The low-maintenance design helps minimize time required to maintain the product; just clean as directed between uses and help reduce the need for expensive repair programs.
231-01-30U includes:* Air-Mate™ PAPR Unit 520-03-63R01* Battery Pack 007-00-15R01* HEPA Filter 451-02-01R01* Airflow Indicator 021-14-00R01* Vinyl Belt GVP-117 Specifications:Weight* PAPR: Approx. 1.1 lbs.* Battery pack: Approx. 1.7 lbs.Battery Pack* Rechargeable NiCd. Up to 8 hours per charge.These respirators help reduce exposure to certain airborne contaminants. Use of 3M™ Positive Pressure Respirators by untrained or unqualified persons, or use not in accordance with the instructions, may adversely affect product performance and result in sickness or death. Positive pressure respirators are to be used only by qualified persons who are properly trained in their use and maintenance, and only in accordance with their operating and maintenance manuals. Each person using these products must first read and understand the operator’s manual. See supervisor for assistance or call 3M OH&ESD Technical Service in U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Important: Before using these respirators, you must determine the following: 1. If there is sufficient oxygen present. 2. The type of contaminant(s) for which the respirator is being selected. 3. The concentration level of contaminant(s). 4. Whether the respirator can be properly fitted on the wearer’s face. All respirator instructions, warnings and use and time limitations must also be read and understood by the wearer before use. Before use of these respirators, a written respiratory protection program must be implemented, meeting all the requirements of OSHA 29 CFR 1910.134, including training, fit testing and medical evaluation.
Pine Environmental Services, Inc.