Bright Star | Flashlights - Lanterns - Pocket Lights
Bright Star
Home » Products » Supplies » Lighting » Bright Star
Products:Industrial Flashlight
 Specially designed to provide reliability for industrial markets, this flashlight provides a sure-gripped ribbed case that is molded from a specialty blended industrial polypropylene to resist most chemicals, oils and grease. Switch guard pre-vents accidental lighting. Features unbreakable Tuflexx® lens, anti-roll design with lens ring standoffs, ABS plastic ring hanger, and spare compartment. Yellow.
Snap Wands for Industrial and WorkSAFE™ Flashlights
Snap Wands are available in snap-in styles and are the perfect solution for easily converting your flashlight into a high-visibility, colorful light wand. Fits all Bright Star 2 and 3 D-cell flashlights with lens ring stand-offs.
Responder™ 2 AA-Cell Submersible Pocketlights
The Responder 2 AA-cell pocketlight is submersible to 100’ and features a push-button switch and pre-focused spot beam. Xenon bulb provides 13,000 candlepower. Fits into helmet clip. UL Division 1 and 2 listed as well as CSA and MSHA.
Responder™ 2 AAA-Cell Submersible Pocketlights
Two AAA-cell flashlights are submersible to 500’ and feature a small size that is ideal for directing light into tight areas that may pose the threat of explosion. Includes light bender, 2 AAA-cell batteries, shirt clip and a stainless steel ring for a key chain. UL listed for use in Division 1 & 2 hazardous locations. CSA and MSHA listed also.
Responder™ 4 AA-Cell Flashlights
Features a xenon bulb that provides 35,000 candlepower, a tail button switch that makes this flashlight perfect for helmet mounting, and an adjustable flood or spot stream of light. Operates on 4 AA-cell batteries. Submersible up to 100’. UL listed for use in Division 2 hazardous locations. CSA and MSHA approved.
Responder™ 3 C-Cell Submersible Flashlights
Impact-resistant flashlight passes the 30’ drop test onto concrete. The 3 C-cell model is powered by 3 C-cell alkaline batteries. Features a push-button switch, a xenon bulb, and tough polycarbonate lens; includes key ring, belt clip and lanyard. Submersible to 100’ and UL listed for use in Division 1 & 2 hazardous locations. CSA and MSHA listed.
Responder™ 2 C-Cell Submersible Flashlights
Two C-cell flashlights are watertight and feature a push-button switch. Impact-resistant design is able to survive a 30’ drop, and xenon bulb provides 30,000 candlepower. Submersible to 100’ and UL listed for use in Division 1 & 2 hazard-ous locations. CSA and MSHA listed.
WorkSAFE™ 6-Volt Lanterns
WorkSAFE 6-volt lanterns are available in two styles for your individual needs. The 6-volt utility lantern features a 120° pivoting head, glove-sized handle and switch, and a dual battery compartment. Provides 30,000 beam candlepower. Available with a black handle with safety orange case. The 6-volt waterproof lantern is ideal where water may be a concern and features an over-sized reflector, super-bright krypton bulb for excellent light output, a circuit breaking mechanism, a glove-sized handle, switch guard and spare bulb holder. Can be powered by an alkaline or carbon zinc 6-volt battery. Provides 50,000 beam candlepower. Both lanterns are UL listed for use in Division 1 hazardous locations. CSA and MSHA approved.
WorkSAFE™ D-Cell Flashlights
Ideal for use in hazardous locations, these flashlights feature a spare bulb compartment, a ring hanger, anti-roll tube design, and an oversized, faceted reflector for more light. Molded in international safety orange. Models 2117 and 2124 offer low-cost maintenance, a crush-resistant case, switch guard, and 250,000 cycle positive locking switch. Waterproof styles 2217 and 2224 feature a 3-way slide switch (On-Off-Flash) and circuit breaker mechanism. Both models are UL and CUL approved for use in Division 1 locations.
Lighthawk™ Utility Lantern
Lighthawk utility lantern features lithium-ion battery technology and a super lightweight design at 2.3 lbs. It has 95 lu-mens and a 1:1 burn-to-charge ratio. The lantern has 4 strategically configured standard white and red LED taillights that make it ideal for utility professionals. Constructed of super tough, waterproof, chemical and heat-resistant nylon, the Lighthawk features a rubberized bottom and bezel for shock absorption. Orange. Lifetime warranty. Approvals: UL, CSA and NFPA.Battery packs, chargers and accessories are available. Please call customer service for more information.
Lighthawk™ Fire Lanterns
Lighthawk fire lanterns feature lithium-ion battery technology and a super lightweight design at just 1.9 lbs. The 120,000 candlepower cuts through smoke with ease and has unwavering brightness from charge to charge with a 1:1 burn-to-charge ratio. Four strategically configured, pulsing, white and red taillight LEDs provide maximum visibility, making this lantern ideal for fire or rescue professionals. Constructed of super tough, waterproof, chemical and heat-resistant nylon, the Lighthawk features a rubberized bottom and bezel for shock absorption. Lifetime warranty. Approvals: UL, CSA, and NFPA.Battery packs, chargers and accessories are available. Please call customer service for more information.
Responder™ 90° Update Kits
These kits provide a hassle-free solution for upgrading your Div 1 or Div 2 Responder from alkaline batteries to a re-chargeable Ni-Cad battery system. Each kit contains either the Div 1 or Div 2 rechargeable Ni-Cad battery and 120V AC/12V DC flashlight charger base and cords.
Bright Star® Batteries
Be prepared for all high drain and continuous use applications. Available in your choice of heavy-duty carbon zinc or alkaline types.
|
SearchEmail Newsletter
 Pine NewsLocationsContact Information
NEW JERSEY
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
Copyright 2009 Pine Environmental Services, Inc. All rights reserved. | |
|
|
|
Pine Environmental Services, Inc.