QED MP15 | Bladder Pump System | Water level meters | Water sampling equipment | Water quality testing

The MP15 MicroPurge® basicsTM Sample Pack combines advanced low-flow control with the quiet power of a built-in compressed gas source, for the ultimate in portability and ease of use. When you use dedicated bladder pumps, there's no need to carry portable pumps and cleaning supplies, so sampling is easier yet.

The simplified flow and drawdown control features of basics control are housed in a molded case along with a lightweight CO₂ cylinder, putting everything you need to operate dedicated bladder pumps into one easily portable unit. A standard padded nylon case protects the MP15 in transport, provides over-the-shoulder on-site carrying convenience, and even has a hook on the back to let you hang it from the well casing during sampling.

The MP15 also includes a bypass fitting, so you can now use one handy unit to sample from both hard to reach wells and from wells accessible with larger gas cylinders and/or compressors. The MP15 has the power you want in an easy to carry package.

Portable power to sample any dedicated bladder pump

Remote wells and inaccessible sites are no problem with the unique, new MP15 Control and Power Pack. The convenient carrying case combines a compact compressed gas cylinder with the advanced control of MicroPurge basics Controllers.

With this combination, a complete sampling setup can be carried by a single person, to reach wells where trucks or even compressor carts can't go.

The 5 lb. CO₂ cylinder provides hours of sampling power, and is easily refilled. But the MP15 isn't just for remote wells. Its built-in bypass fitting allows it to be used with larger cylinders or other gas sources, extending your range even more.

Simple, stable, repeatable flow rate setting

The MicroPurge basics Controller's six-button keypad is your gateway to the control and power of the most advanced low-flow sampling system ever made. With remarkable ease, you will achieve precise, stable control of low pumping rates, quickly and repeatably, from one sampling event to the next.

QED's third-generation engineering takes advantage of the opportunity for downsized equipment, which is lighter and more portable, reduces equipment cost and increases sampling crew productivity. Dedicated pump systems make sampling even faster and easier, eliminating the need to carry portable pumps and cleaning equipment to the well. Simplified, sealed electronics are put together in a design that delivers famous QED durability and value.

MicroPurge basics controllers can be connected to the MP30 Drawdown Meter for optional Automatic Drawdown Control, an industry first.

Multi-mode digital control

The MicroPurge basics Controller gives you three easy-to-use operating modes, to cover every sampling protocol and situation.

MicroPurge Mode easily adjusts low-flow rates with "faster/slower" arrow keys to reach desired rates. You don't have to worry about calculating pump cycles or refill and discharge times.

ID Mode instantly recalls optimized settings previously established for each well, providing precise, consistent performance from event to event.

User Set (MN) Mode provides manual control of pump operation for extreme depths and other special cases.

ADVANTAGES

• All the advanced MicroPurge control capabilities of basics controllers, plus a lightweight, built-in CO₂ source for ultimate portable control and power
• Exclusive MicroPurge control mode uses simple arrow keys o adjust low-flow rates easily and repeatably, using a microprocessor to re-create flow adjustment strategies used by experienced samplers
• The MP15 weighs just 27 lbs. with a full cylinder in its padded nylon field case. Backpack carrying leaves hands free for other sampling equipment
• Also includes capability for optional drawdown control with link to the MP30 Drawdown Meter
• Lightweight, silent drive power: 3.5 hours of purging capacity at 75 foot pump depth! A high quality CO₂ regulator is included, along with a cylinder change wrench: FIELD READY
• The MP15 includes a quick connected bypass fitting so other compressed gas sources can also be used, for maximum versatility