Andersen PUF System | Air Sampling Equipment | Ambient Particulate Samplers

The PUF (Polyurethane Foam) Sampler is a complete air sampling system designed to simultaneously collect suspended airborne particulates as will as trap airborne organic vapors at flow rates up to 280 liters per minute. The PUF Sampler is equipped with a bypass blower motor arranged with an independent cooling fan. This feature permits the motor to operate at low sampling flow rates for extended periods without motor failure from overheating.

A dual chambered aluminum sampling module contains both filtering systems. The upper chamber supports the airborne particulate filter media in a circular a filter holder. The lower chamber encapsulates a glass cartridge, which contains the Polyurethane Foam for vapor entrapment.

A wide variety of sorbents can be used in a manner that permits their continual use. Polyurethane foam or wet/dry granular solid media can be used individually or in combination. The dual chambered sampling module designed for easy access to both upper and low media. The threaded lower canister moved with the cartridge intact for immediate exchange. Filter support screens and module components are equipped with gaskets providing a leak proof seal during the sampling process.

Airflow rates are infinitely variable up to 280 liters per minute. The voltage variator adjustment screw alters the blower motor speed to achieve the desired flow rate. Air flow rate is measured through the flow venturi utilizing a 0-100” Magnehelic Gage. Periodic calibration is necessary to maintain on-site sampling accuracy.

A seven day mechanical timer is included as standard equipment and permits weekly scheduling with individual settings for each day and 14 trippers to turn the sampler on and off. Any day or days may be omitted and day and night periods are distinctly marked. Other timers and programmers are available optionally to suit any sampling requirement.